Municipal Waste Water
- All Products
- Activated Sludge
- Aluminum
- Ammonia Gas Detector
- Ammonium
- Bromine
- Calibration Gas
- Cation Conductivity
- Chemical Feed Pumps
- Chemical Oxygen Demand
- Chemical Pumps (Hazardous Duty)
- Chloride
- Chlorine (Combined)
- Chlorine (Free)
- Chlorine (Residual)
- Chlorine (Total)
- Chlorine Dioxide
- Colour of Water
- Combustible Gas Detector
- Conductivity
- Dewpoint
- Dewpoint (Hazardous Location)
- Dichloramine
- Dissolved Hydrogen
- Dissolved Iron
- Dissolved Oxygen
- Dissolved Ozone
- DPD
- DPD and Reagents
- Explosion Proof Pressure Gauges
- Explosion Proof Temperature Sensors
- Float Level Switches
- Flow Meter (Coriolis)
- Flow Meters (Magnetic)
- Flow Meters (Paddle Wheel)
- Fluoride
- FMI Pumps
- Fuels
- Full Directory
- HAA
- Hydrazine
- Hydrocarbons
- Iodine
- Ion Selective Electrodes
- Level
- Level Measurement
- Manganese
- Modular Gas Detector
- Monochloramine
- Multi Parameters
- Nitrate
- OIl in Water
- ORP
- Pendulum Level Switches
- pH
- Phosphate
- Pneumatic Valve Units
- Portable Gas Detector
- Pressure Gauges
- Redox
- Salinity
- Sample Conditioning
- Sensors
- Silica
- Sludge Blanket
- Sodium
- Solenoid valves
- Solenoid valves Hazardous
- Specialty Pumps (Dispensing, OEM)
- Specialty Pumps (Dispensing)
- Specialty Pumps (Metering, OEM)
- Specialty Pumps (Metering)
- Specialty Pumps (Waste Transfer)
- Specific Conductivity
- Specific Resistivity
- Suspended Solids
- TDS
- Technical Article
- Temperature
- Temperature Sensors
- THM
- TOC
- Total Alkalinity
- Total Dissolved Solids
- Total Hardness
- Total Iron
- Total Organic Carbon
- Toxic Gas Detector
- Trihalomethanes
- Turbidity
- Universal Gas Detector
- UVT
- VOC
- Water Hardness
- Water Treatment Controller
- Wet Gas Detector
Combustible Gas Detector system eliminates the need for frequent response checks with ATi’s pioneering AutoTest. This transmitter performs an automatic test using self-generated gas on…
The revolutionary SWAN AMI Turbiwell LED online turbidity analyzer boasts unique features not found in other turbidity analyzers. The non-contact, EPA approved white light LED…
The Hanna Turbidity and Chlorine HI93414 is a high accuracy Handheld analyzer. Combining nephelometer and photometer to measure key parameters in drinking water. calibration and…
Chlorine monitoring system, provides monitoring for several species of disinfectants with one instrument. The instrument can monitor for free chlorine and total chlorine, and can…
Detection of combustible levels of methane or other hydrocarbons % LEL. It may also be used for monitoring CO2 levels, either in ppm or percent…
Complete monitoring system for the automatic, continuous measurement of ortho- phosphate in boiler water, district heating, cooling water and waste water. Measuring range: 0.1 to…
The OxyTechw² GAL Sensor has been designed to provide highly reliable Dissolved Oxygen measurements. The sensor employs the traditional galvanic principle. The rugged 100 micron,…
Direct–acting Type 6014 valve for individual or manifold mounting with push–over coil, for use with a variety media depending on the materials of construction. Delivered…
Servo-assisted solenoid valve with diaphragm, normally closed function. Hermetic isolation of fluid from the actuator. A minimum differential pressure of 7 PSI is required to…
The Type 5282 is a pilot-controlled normally closed solenoid valve with a servo-diaphragm, media separated, for universal use with liquid and gaseous media corresponding to…
The Type 6213 is a 2/2–way normally closed solenoid valve with a forced coupled diaphragm system. It switches from 1.5 PSI and can be used…
The TurbiTechw² HR Sensor has been specifically designed for use in wastewater treatment systems where high levels of suspended solids are desirable in the aeration…
The TurbiTechw² LA Sensor has been designed for use in aeration systems monitoring suspended solids also known as mixed liquor suspended solids or activated sludge…
The ASLD2200 is a fully automatic sludge blanket level detector designed for the water and waste water industry. It utilises a servo-driven sensor which continually…
The SludgeWatch Ultra utilizes the industry accepted look down ultrasonic or ‘sonar’ method of detecting and tracking the interface between sludge and water in water,…
The SludgeWatch 8200w² Monitor provides a reliable method of detecting the sludge blanket level in clarifiers and settlement tanks, or increasing levels of suspended solids…
The SludgeWatch 715 provides a simple, low cost method of spot checking the sludge blanket level in a wide variety of settlement tanks. The cable…
UVT Monitor – UV Transmittance at 254 nm SWAN AMI SAC 254 UVT Monitor for the continuous measurement of UV transmittance absorption at 254 nm…
Online Phosphate Analyzer AMI Phosphate-II AC Online Phosphate Analyzer using the colorimetric process for the automatic, continuous measurement of phosphate. Call Contact Description Specification Application…
An electronic transmitter for continuous pH or redox (ORP) measurements for water steam cycle, potable water, high purity water or waste water. The size of…
Meridian Universal Gas Detector Teledyne The Meridian Universal Gas Detector is one detector with global approvals and a plug-and-play design, for toxic and combustible gases…
Wet H2S gas monitor is a new type of gas sensor technology that allows continuous monitoring of hydrogen sulfide in both inlet and discharge air,…
ATi’s E12-15 IR Infrared High Level Ammonia Gas Detector is a rugged, reliable, microprocessor-based, intelligent gas detector. The E12-15 IR can be used to monitor…
A14/A11 Modular Gas Detector is a flexible component system providing a variety of options to meet individual gas detection and alarm requirements. From chemical and…
Locating the source of gas leaks can be a challenge, especially in plant areas with multiple potential leak sources. Ammonia refrigeration piping, ozone generator skids,…
B12 Wet Gas System was developed to meet the need for reliable measurements in wet scrubber outlets for other gas streams that might be saturated…
ATI’s Series F12/D provides a high level of confidence that your system is functional at all times. Our Auto-Test feature provides an actual gas “bump…
Our UniSens universal 2-wire gas transmitter handles 28 different gases, providing the most economical and flexible gas measurement system available today. Combining universal electronics, bench…
The MS1800 is a VOC and Hydrocarbon Gas Concentration Analyzer. It is designed to monitor VOC gases in industrial processes and applications as well as…
The high performance Coriolis mass flow meter distinguishes itself from the competition because we are able to achieve higher flow rates and mass flow measurements…
The EPS offers several advantages over similar models. It is designed specifically for reliability and longevity in harsh environments, comes in a wide variety of…
The MIST M340 RTD Temperature Transmitter consists of surface mount ring type RTD, extension cable to remote transmitter and M12 connector. It is designed for…
Dial Thermometers are mechanical temperature indicators consisting of a pointer precisely connected to a bimetal helix stem which moves due to temperature changes in the…
PTS® Series (Programmable Temperature Switches) are of very compact design. This unique construction can replace other commonly used temperature switches in a variety of applications.…
The PTS®201 is a microprocessor-based wall mounted temperature switch. It features stainless RTD probe, painted aluminum die cast housing in which electronics are potted. Based…
Stainless Steel NEMA 4X Housing Battery Powered, Loop 2-wire Powered & 3-wire Powered 4-20mA Available with 2 and 3-wire LED or LCD Display Matched Pairs…
Series PTS02 is a Programmable Temperature Switch & Transmitter offering an analog 4-20 mA output, transistor or relay switch output, and an optional RTD output.…
The DTG07 series Digital Temperature Gauges are a complete solution for most industrial temperature monitoring and temperature indicating applications. Of high quality construction, these gauges…
A top mount display with an adjustable compression fitting process connection the DTG03 Digital Temperature Gauge is a Digital RTD thermometer and a complete solution…
MIST55 RTD Pt 100 temperature sensor is a complete RTD temperature sensor probe, signal conditioner and 4-20mA output. You provide the 12 to 36 Vdc…
MIST M03 RTD Pt 100 temperature sensor a complete RTD temperature sensor probe, signal conditioner and 4-20mA output. Intempco MIST patented RTD (Pt100) sensor probes…
The key feature that make these sensors innovative is that they are the world’s first ever temperature sensors that have a built-in and fully programmable…
The Iwaki LK Series metering pumps are motor-driven, mechanically-actuated diaphragm metering pumps. This larger Series can achieve outputs up to 856 GPH (3240 l/h) and…
The EJ Series provide precise chemical injection at an economical price. Universal voltage capability enables operation from 100 – 240VAC in virtually all countries. The…
The HI98703 Hanna Portable Turbidity Metre is specially designed for water quality measurements, providing reliable and accurate readings, especially in the low turbidity range. State-of-the-art…
IX Series Metering Pumps are digitally controlled direct-drive diaphragm pumps. Years of experience in high-end motor technology result in extremely accurate and energy efficient metering…
EZ Series Water Treatment Chemical Pump offer precise chemical feed injection at a low cost. The compact size and simple control make them ideal for…
EZ Series Water Treatment Chemical Pump offer precise chemical feed injection at a low cost. The compact size and simple control make them ideal for…
Combining the EHE performance with a turndown ratio of 1800:1 yields one of the most versatile pumps in the water treatment industry today. Superior mechanical…
4 Gas Calibration Gas Available in multiple variations to meet your needs. H2S, Methane or Pentane, CO, O2 The best pricing in the industry with…