Compact Body Solenoid Valve for Fluids - 2/2-way - Burkert Type 6213

Switches from 1.5 PSI and can be used universally for fluids.

Direct acting, 0 to 140 PSI range.

Direct acting, 0 to 140 PSI range.
  • Description
  • Specification
  • Downloads

The Type 6213 is a 2/2–way normally closed solenoid valve with a forced coupled diaphragm system. It switches from 1.5 PSI and can be used universally for fluids. For complete opening, a differential pressure of at least 1.5 PSI is necessary.

  • Compact body with high flow rate.
  • 1/4″ NPT up to 2″ NPT Sizes
  • Brass or 316 stainless steel body.
  • Direct acting, 0 to 140 PSI range.
  • Cold or hot water.
  • Optional LED indicators.
  • Push-over coil.
  • Waterhammer-free, low noise.
  • Energy-saving double coil technology with kick and drop design
  • Diaphragm materials:
    • NBR
    • EPDM
    • FKM


The spring coupling of the diaphragm supports the opening process of the valve.

In its standard version, the valve is suitable for use in liquids. A minimum differential pressure is required for complete opening. A special version (HP00) which opens the valve without differential pressure is available for gas and vacuum applications.

Various diaphragm material combinations are available depending on the application.

The standard brass housing satisfies all European drinking water requirements. Dezincification-resistant brass is available for other markets.

The housing offering is rounded off with a stainless steel version. To reduce power consumption in operation, coils with “Kick and Drop” (KD) electronics (double coil technology) are available.

In combination with a plug in accordance with DIN EN 175301-803 Form A, the valves satisfy protection class IP65 – in combination with a stainless steel housing NEMA 4X.

6213 - 2/2-way Solenoid Valves for Fluids - Compact Body
Valve Specifications

The Type 6213 is a 2/2–way normally closed solenoid valve with a forced coupled diaphragm system. It switches from 1.5 PSI and can be used universally for fluids. For complete opening, a differential pressure of at least 1.5 PSI is necessary.

  • Compact body with high flow rate.
  • 1/4″ NPT up to 2″ NPT Sizes
  • Brass or 316 stainless steel body.
  • Direct acting, 0 to 140 PSI range.
  • Cold or hot water.
  • Optional LED indicators.
  • Push-over coil.
  • Waterhammer-free, low noise.
  • Energy-saving double coil technology with kick and drop design
  • Diaphragm materials:
    • NBR
    • EPDM
    • FKM


The spring coupling of the diaphragm supports the opening process of the valve.

In its standard version, the valve is suitable for use in liquids. A minimum differential pressure is required for complete opening. A special version (HP00) which opens the valve without differential pressure is available for gas and vacuum applications.

Various diaphragm material combinations are available depending on the application.

The standard brass housing satisfies all European drinking water requirements. Dezincification-resistant brass is available for other markets.

The housing offering is rounded off with a stainless steel version. To reduce power consumption in operation, coils with “Kick and Drop” (KD) electronics (double coil technology) are available.

In combination with a plug in accordance with DIN EN 175301-803 Form A, the valves satisfy protection class IP65 – in combination with a stainless steel housing NEMA 4X.

6213 - 2/2-way Solenoid Valves for Fluids - Compact Body
Valve Specifications