Direct–acting Type 6014 valve for individual or manifold mounting with push–over coil, for use with a variety media depending on the materials of construction. Delivered in various body materials and also suitable for use in technical vacuum Direct-acting, compact valve.…
Servo-assisted solenoid valve with diaphragm, normally closed function. Hermetic isolation of fluid from the actuator. A minimum differential pressure of 7 PSI is required to fully open the valve. Valves can be mounted or removed radially for a space-saving installation.…
The Type 5282 is a pilot-controlled normally closed solenoid valve with a servo-diaphragm, media separated, for universal use with liquid and gaseous media corresponding to the material resistance.As standard, the 3-way pivoted armature pilot drive has an emergency manual operation.…
The Type 6213 is a 2/2–way normally closed solenoid valve with a forced coupled diaphragm system. It switches from 1.5 PSI and can be used universally for fluids. For complete opening, a differential pressure of at least 1.5 PSI is…
The 8640 valve unit system is designed to solve diverse and complex control problems due to its systematic modular construction and combination of pneumatic and electrical interfaces.By putting together a row of pneumatic modules with different numbers of valves, 2…
The AirLINE System integrates high performance solenoid pilot valves, remote electronic I/O and fieldbus communication into a process actuation and control system that is both compact and extremely flexible. Its modular design allows fully customized, pre-mounted and tested solutions to…
This direct-acting plunger solenoid valve Type 0256 can be used in many ways. It is delivered with brass or stainless steel bodies for a wide range of orifices and connections. Block screwed coil system. Up to DN 12. Brass or…
Valve 6013 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. A Bürkert-specific flange design (SFB) enables space-saving arrangement…
The Burkert Type 0290 valve is a Hazardous Area Classification servo-assisted diaphragm valve of the S.EV series. The valve opens without differential pressure. The opening process is facilitated by the fix coupling of the diaphragm to the magnetic core. The…
The Burkert type 6281 2/2 Way Diaphragm Valve is a servo-assisted solenoid valve of the S.EV series. A minimum differential pressure is always required for the function of the valve. Various diaphragm material combinations and methods of operation are available…
The compact low-flow sensor Type 8031 with paddle-wheel and Hall sensor is specially designed for use in aggressive and solid-free liquids. The particular cost attractive measuring principle is based on a local flow velocity measurement. The sensor produces a flow…
This flowmeter threshold detector with display is designed for use in clear, neutral or aggressive liquids. The switching outputs enable the direct switching of valves and the establishment of a simple On/Off control circuit within a monitoring system. The switching…
The Type 8025 batch controller flowmeter or batch controller is specially designed for use in neutral, slightly aggressive, solid-free liquids. Type 8025 flowmeter is offered in different versions. • The compact flowmeter with paddle wheel sensor is available in two…
The flowmeter with paddle wheel for continuous flow measurement is especially designed for use in neutral, slightly aggressive, solid free liquids. The Bürkert 8020 designed fitting system ensures simple installation of the devices into all pipes from DN 20…DN 400.…
The Insertion Paddle Wheel flowmeter Type 8026 is a compact device, specially designed for measuring the flow rate in solid-free liquids, in a variety of applications (water, waste water monitoring, chemical processing, etc.). Type 8036 converts the measured signal, displays…
Continuous Flow Measurement paddle wheel flow meter is available in magnetic or optical version. The magnetic version of the measuring instrument is especially designed for use with neutral, slightly aggressive, solid free liquids. The optical version is exclusively intended for…
The inline Paddle Wheel flowmeter Type 8036 is a compact device, specially designed for measuring the flow rate in solid-free liquids, in a variety of applications (water, waste water monitoring, chemical processing, etc.). Type 8036 converts the measured signal, displays…
Level Transmitters & Instrumentation Burkert, Kobold, Intempco & B/W Controls A large selection of Fluid Level Transmitters & Instrumentation available for shipping from our location in Calgary, Alberta, Canada. Call Contact We stock a large selection of Level Transmitters &…
Magnetic Flow Meters Burkert A large selection of quality Magnetic Flow Meters available for shipping from our location in Calgary, Alberta, Canada. Call Contact We stock a large selection of Magnetic Flow Meters available for shipping from our location in…
Burkert Canada Supplier for industrial measurement and control technology, fluid technology: Systems for measuring and controlling gases and fluids from individual valves, sensors or controls up to complete automation solutions and fluid systems.
Products Including:
Industry examples:
Analysis technology, automotive industry, biotechnology, chemical industry, electronics, energy, genetic engineering, semiconductor industry, cosmetic, food & beverage and pharma industry, engineering, medical, sanitary engineering, textile industry, packaging and water treatment.
WJF Instrumentation Ltd.
#5 3610 – 29th Street N.E.
Calgary, Alberta
Canada
T1Y 5Z7
Calgary Head Office
Toll-Free: (877)291-5572
Standard: (403)291-5570
Ontario & Maritimes Sales:
(905)809-6918
