wjf-logo
1 877 291 5572    |    Contact Us    |    Search

Online Total Alkalinity Analyzer (@ pH 4.3)

Seres Topaz Total Alkalinity

Complete monitoring system for the automatic, continuous measurement of total alkalinity TA in potable water, demin water production and process water.

Call
Contact
Total Alkalinity
  • Description
  • Specification
  • Application
  • Options
  • Downloads
  • F.A.Q

Online Total Alkalinity Analyzer

Complete monitoring system for the automatic, continuous measurement of total alkalinity TA in potable water, demin water production and process water. For the continuous, acid-base titration online determination of alkalinity.
  • Available in several measuring ranges:
    • 5 – 50 ppm CaCO3 or
    • 10 – 200 ppm CaCO3 or
    • 10 – 500 ppm CaCO3
  • Complete system including measurement and control electronics, measuring unit, flow indicator, reaction chamber and reagent dosing system.
  • Robust, high quality analyzer cabinet painted stainless steel, 316L.
  • Automatic, electrical zero measurement prior to each measurement cycle.
  • Automatic cell cleaning.
  • 2 easily accessible peristaltic pump modules for accurate, automatic dosing of chemical reagents.
  • 2 analog and 7 digital outputs for alarms for process values and diagnostic alarms for each sample stream.
  • RS485 Modbus/JBUS RTU interface.
  • Large back-lit touchscreen color LCD display for the reading of all measured values and status information simultaneously.
  • Easy menu-guided operation in English or French.

The Serez OL Topaz series provides you with a high-quality industrial-grade Total Alkalinity analyzer specific to your analysis requirement.

Seres OL Analyzer Topaz Total Alkalinity (@ pH 4.3)
Acid-base titration method: The TA is titled (complete alkalimetric title (OH-, CO32-, HCO3-)) using sulfuric acid (concentration varies depending on the range) and a colored indicator, TAC indicator (pH turn 3.1-4.6)
  • Reaction time 6-10 min.
  • Topaz Total Alkalinity 10-500ppm CaCO3
    • LOD ≤10ppm
    • Repeatability < ± 5 % FS or ± 5ppm (whichever is greater)
    • Accuracy < ± 5 % FS or ± 5ppm (whichever is greater)
Complete system including measurement and control electronics, measuring unit, flow indicator, reaction chamber and reagent dosing system. Signal outputs
  • 2 programmable signal outputs for measured values (freely scalable, linear).
  • Current loop: 4 – 20 mA
  • Communication interfaceRS485 interface (galvanically separated) with Modbus/JBUS RTU protocol.
  • Ethernet interface (TCP/IP) optional.
Relays
  • Alarm Relay s 1 summary alarm for ” analyzer failure”Maximum load:1A / 24 V
  • 2 potential-free contacts for each channel programmable as limit switches for measuring values (high/low thresholds)
  • 1 sample flow alarm for each channel
  • 1 output for indication of the active sample stream for each channel.
  • 1 output for maintenance indication.
For full details please view or download the Total Alkalinity DATE SHEET
  • Total Alkalinity in Potable Water.
  • Total Alkalinity in Process Water.
  • Total Alkalinity in demin Water Production.

Analyzer

  • Seres OL Topaz Total Alkalinity (@pH 4.3) (select range from below) SOL-58.321.000

Range Selections

  • 5-50 ppm CaCO3 Specify in Order
  • 10-200 ppm CaCO3 Specify in Order
  • 10-500 ppm CaCO3 Specify in Order

Configuration

  • 2-Channel Setup (similar range) SOL-83.590.020
  • 4-Channel Setup (similar range) SOL-83.590.040
  • 6-Channel Setup (similar range) SOL-83.590.060
  • Ethernet Interface (TCP/IP) SOL-81.410.020

Option

  • 1-Year Spare Part Package “Basis” (Analyzer + 1st channel) SOL-84.110.130
  • 1-Year Spare Part Package “Multi-Channel” (add once if multi-channel config. was selected) SOL–84.110.150
  • Reagent shelf inf SS316L SOL-89.610.010

Reagent specifications

  • TAC Indicator RXX175
    Reagent Consumption 0.6l/month
  • Sulfuric Acid N/200 (50ppm) RXX174N_005
  • Sulfuric Acid N/50 (200ppm) RXX174N_02
  • Sulfuric Acid N/20 (500ppm) RXX174N_05
    Reagent Consumption (middle range)
    10l/month (20l/month max.)
pdf

Product Flyer Seres OL Topaz Analyzer Series

pdf
Datasheet Online Total Alkilinity Analyzer Topaz
  • 2 programmable signal outputs for measured values (freely scalable, linear). Current loop:4 – 20 mA
  • Communication interface RS485 interface (galvanically separated) withModbus/JBUS RTU protocol.
  • Ethernet interface (TCP/IP) optional.

Relays

  • Alarm Relay s 1 summary alarm for ” analyzer failure”Maximum load:1A / 24 V
  • 2 potential-free contacts for each channel programmable as limit switches for measuring values (high/low thresholds)
  • 1 sample flow alarm for each channel
  • 1 output for indication of the active sample stream for each channel.
  • 1 output for maintenance indication.

All Swan Analyzers are CSA Certified at our premises before shipping.

Min 30 l/h

Optimum 40 l/h

 

Online Total Alkalinity Analyzer

Complete monitoring system for the automatic, continuous measurement of total alkalinity TA in potable water, demin water production and process water. For the continuous, acid-base titration online determination of alkalinity.
  • Available in several measuring ranges:
    • 5 – 50 ppm CaCO3 or
    • 10 – 200 ppm CaCO3 or
    • 10 – 500 ppm CaCO3
  • Complete system including measurement and control electronics, measuring unit, flow indicator, reaction chamber and reagent dosing system.
  • Robust, high quality analyzer cabinet painted stainless steel, 316L.
  • Automatic, electrical zero measurement prior to each measurement cycle.
  • Automatic cell cleaning.
  • 2 easily accessible peristaltic pump modules for accurate, automatic dosing of chemical reagents.
  • 2 analog and 7 digital outputs for alarms for process values and diagnostic alarms for each sample stream.
  • RS485 Modbus/JBUS RTU interface.
  • Large back-lit touchscreen color LCD display for the reading of all measured values and status information simultaneously.
  • Easy menu-guided operation in English or French.

The Serez OL Topaz series provides you with a high-quality industrial-grade Total Alkalinity analyzer specific to your analysis requirement.

Seres OL Analyzer Topaz Total Alkalinity (@ pH 4.3)
Acid-base titration method: The TA is titled (complete alkalimetric title (OH-, CO32-, HCO3-)) using sulfuric acid (concentration varies depending on the range) and a colored indicator, TAC indicator (pH turn 3.1-4.6)
  • Reaction time 6-10 min.
  • Topaz Total Alkalinity 10-500ppm CaCO3
    • LOD ≤10ppm
    • Repeatability < ± 5 % FS or ± 5ppm (whichever is greater)
    • Accuracy < ± 5 % FS or ± 5ppm (whichever is greater)
Complete system including measurement and control electronics, measuring unit, flow indicator, reaction chamber and reagent dosing system. Signal outputs
  • 2 programmable signal outputs for measured values (freely scalable, linear).
  • Current loop: 4 – 20 mA
  • Communication interfaceRS485 interface (galvanically separated) with Modbus/JBUS RTU protocol.
  • Ethernet interface (TCP/IP) optional.
Relays
  • Alarm Relay s 1 summary alarm for ” analyzer failure”Maximum load:1A / 24 V
  • 2 potential-free contacts for each channel programmable as limit switches for measuring values (high/low thresholds)
  • 1 sample flow alarm for each channel
  • 1 output for indication of the active sample stream for each channel.
  • 1 output for maintenance indication.
For full details please view or download the Total Alkalinity DATE SHEET
  • Total Alkalinity in Potable Water.
  • Total Alkalinity in Process Water.
  • Total Alkalinity in demin Water Production.

Analyzer

  • Seres OL Topaz Total Alkalinity (@pH 4.3) (select range from below) SOL-58.321.000

Range Selections

  • 5-50 ppm CaCO3 Specify in Order
  • 10-200 ppm CaCO3 Specify in Order
  • 10-500 ppm CaCO3 Specify in Order

Configuration

  • 2-Channel Setup (similar range) SOL-83.590.020
  • 4-Channel Setup (similar range) SOL-83.590.040
  • 6-Channel Setup (similar range) SOL-83.590.060
  • Ethernet Interface (TCP/IP) SOL-81.410.020

Option

  • 1-Year Spare Part Package “Basis” (Analyzer + 1st channel) SOL-84.110.130
  • 1-Year Spare Part Package “Multi-Channel” (add once if multi-channel config. was selected) SOL–84.110.150
  • Reagent shelf inf SS316L SOL-89.610.010

Reagent specifications

  • TAC Indicator RXX175
    Reagent Consumption 0.6l/month
  • Sulfuric Acid N/200 (50ppm) RXX174N_005
  • Sulfuric Acid N/50 (200ppm) RXX174N_02
  • Sulfuric Acid N/20 (500ppm) RXX174N_05
    Reagent Consumption (middle range)
    10l/month (20l/month max.)
pdf

Product Flyer Seres OL Topaz Analyzer Series

pdf
Datasheet Online Total Alkilinity Analyzer Topaz
  • 2 programmable signal outputs for measured values (freely scalable, linear). Current loop:4 – 20 mA
  • Communication interface RS485 interface (galvanically separated) withModbus/JBUS RTU protocol.
  • Ethernet interface (TCP/IP) optional.

Relays

  • Alarm Relay s 1 summary alarm for ” analyzer failure”Maximum load:1A / 24 V
  • 2 potential-free contacts for each channel programmable as limit switches for measuring values (high/low thresholds)
  • 1 sample flow alarm for each channel
  • 1 output for indication of the active sample stream for each channel.
  • 1 output for maintenance indication.

All Swan Analyzers are CSA Certified at our premises before shipping.

Min 30 l/h

Optimum 40 l/h

 
i-acd-icon.gif
Burkert Canada
i-bwcontrols-icon.gif
Delta Instrument Canada
Fluid Metering Canada
Hanna Canada
HF Scientific Canada
Intempco Canada
Kobold Instrumentation
Multisensor Systems Canada
i-partech-icon.gif
Swan Canada Logo
Van London Canada
Walchem Canada
wjf-logo

1 877 291 5572

info@wjf.ca

Municipal Drinking Water
Municipal Wastewater
Industrial Wastewater
Power Generation
Pulp & Paper
Chemical Manufacturing
Oil, Gas & Fracturing
Beverage Manufacturing
Food Production
Pharmaceutical & Medical
Laboratory

Links

About WJF
Contact WJF
Privacy Policy
Terms & Conditions
Site Map

WJF Instrumentation Ltd.
#5 3610 – 29th Street N.E.
Calgary, Alberta
Canada
T1Y 5Z7

Calgary Head Office
Toll-Free: (877)291-5572
Standard: (403)291-5570

Ontario & Maritimes Sales:
(905)809-6918