wjf-logo
1 877 291 5572    |    Contact Us    |    Search

Online Color Analyzer

Seres Topaz Color

The continuous measurement of color in potable water and surface water.

Call
Contact
Seres OL Analyzer Topaz Color

Online Color Analyzer

Complete monitoring system for the automatic, continuous measurement of color in potable water and surface water.

For the continuous, absorptive online determination of color per ISO 7887 (Pt) / ISO 6271 (Cr-Co) / SO 6271:2015 (Pt-Co).

  • Available in separate measuring ranges and measuring
    units:
    • 0 to 50 (Hazen or mg/l Pt or mg/l Cr-Co) or
    • 0 to 100 (Hazen or mg/l Pt or mg/l Cr-Co) or
    • 0 to 250 (Hazen or mg/l Pt or mg/l Cr-Co)
  • Complete system including measurement and control electronics, measuring unit, flow indicator, reaction chamber, reagent dosing system and a cleaner system.
  • Robust, high quality analyzer cabinet painted stainless steel, 316L.
  • Automatic, electrical zero measurement prior to each measurement cycle.
  • Automatic cell cleaning.
  • 2 analog and 7 digital outputs for alarms for process values and diagnostic alarms for each sample stream.
  • RS485 Modbus/JBUS RTU interface.
  • Large back-lit touchscreen color LCD display for the reading of all measured values and status information simultaneously.
  • Easy menu-guided operation in English or French.

The Serez OL Topaz series provides you with a high-quality industrial-grade analyzer specific to your Color analysis requirement.

Color
Absorptive method; The measurement principle is based on the comparison of the color of a sample to that of a scale of Platinum-Cobalt or Cr-Co solutions.
  • Reaction time 4-5 min.
  • Seres OL Topaz Color 0-250 Hazen
    • Limit of Detection 4 H
    • Repeatability ± 1-2 % FS
    • Precision ± 1-2 % FS
    • Interferences Turbidity
Complete system including measurement and control electronics, measuring unit, flow indicator, reaction chamber and reagent dosing system. Signal outputs
  • 2 programmable signal outputs for measured values (freely scalable, linear).
  • Current loop: 4 – 20 mA
  • Communication interfaceRS485 interface (galvanically separated) with Modbus/JBUS RTU protocol.
  • Ethernet interface (TCP/IP) optional.
Relays
  • Alarm Relay s 1 summary alarm for ” analyzer failure”Maximum load:1A / 24 V
  • 2 potential-free contacts for each channel programmable as limit switches for measuring values (high/low thresholds)
  • 1 sample flow alarm for each channel
  • 1 output for indication of the active sample stream for each channel.
  • 1 output for maintenance indication.
For full details please view or download the Color DATE SHEET
  • Color in Potable Water.
  • Color in Surface Water

Analyzer

  • Seres OL Topaz Color (0-50 or 0-100 or 0-250 Hazen [or mg/l Pt or Cr-Co]) SOL–55.351.000

Range Configuration

  • 0-50 or 0-100 or 0-250 Contact Sales

Unit Configuration

  • Hazen or mg/l Pt or mg/l Cr-Co Contact Sales

Configuration

  • 2-Channel Setup (similar range) (similar range) SOL-83.590.020
  • 4-Channel Setup (similar range) (similar range) SOL-83.590.040
  • 6-Channel Setup (similar range) (similar range) SOL-83.590.060
  • Ethernet Interface (TCP/IP) SOL-81.410.020

Option

  • 1-Year Spare Part Package “Basis” (Analyzer + 1st channel) SOL-84.110.080
  • 1-Year Spare Part Package “Multi-Channel” (add once if multi-channel configuration was selected) SOL-84.110.150
  • Reagent shelf inf SS316L SOL-89.610.010

Reagent specifications

  • No Reagents Required
pdf

Product Flyer Seres OL Topaz Analyzer Series

pdf
Datasheet Online Color Analyzer Topaz
  • 2 programmable signal outputs for measured values (freely scalable, linear). Current loop:4 – 20 mA
  • Communication interface RS485 interface (galvanically separated) withModbus/JBUS RTU protocol.
  • Ethernet interface (TCP/IP) optional.

Relays

  • Alarm Relay s 1 summary alarm for ” analyzer failure”Maximum load:1A / 24 V
  • 2 potential-free contacts for each channel programmable as limit switches for measuring values (high/low thresholds)
  • 1 sample flow alarm for each channel
  • 1 output for indication of the active sample stream for each channel.
  • 1 output for maintenance indication.

All Swan Analyzers are CSA Certified before shipping.

Min 30 l/h

Optimum 40 l/h

 

Description

Online Color Analyzer

Complete monitoring system for the automatic, continuous measurement of color in potable water and surface water.

For the continuous, absorptive online determination of color per ISO 7887 (Pt) / ISO 6271 (Cr-Co) / SO 6271:2015 (Pt-Co).

  • Available in separate measuring ranges and measuring
    units:
    • 0 to 50 (Hazen or mg/l Pt or mg/l Cr-Co) or
    • 0 to 100 (Hazen or mg/l Pt or mg/l Cr-Co) or
    • 0 to 250 (Hazen or mg/l Pt or mg/l Cr-Co)
  • Complete system including measurement and control electronics, measuring unit, flow indicator, reaction chamber, reagent dosing system and a cleaner system.
  • Robust, high quality analyzer cabinet painted stainless steel, 316L.
  • Automatic, electrical zero measurement prior to each measurement cycle.
  • Automatic cell cleaning.
  • 2 analog and 7 digital outputs for alarms for process values and diagnostic alarms for each sample stream.
  • RS485 Modbus/JBUS RTU interface.
  • Large back-lit touchscreen color LCD display for the reading of all measured values and status information simultaneously.
  • Easy menu-guided operation in English or French.

The Serez OL Topaz series provides you with a high-quality industrial-grade analyzer specific to your Color analysis requirement.

Color
Specifications
Absorptive method; The measurement principle is based on the comparison of the color of a sample to that of a scale of Platinum-Cobalt or Cr-Co solutions.
  • Reaction time 4-5 min.
  • Seres OL Topaz Color 0-250 Hazen
    • Limit of Detection 4 H
    • Repeatability ± 1-2 % FS
    • Precision ± 1-2 % FS
    • Interferences Turbidity
Complete system including measurement and control electronics, measuring unit, flow indicator, reaction chamber and reagent dosing system. Signal outputs
  • 2 programmable signal outputs for measured values (freely scalable, linear).
  • Current loop: 4 – 20 mA
  • Communication interfaceRS485 interface (galvanically separated) with Modbus/JBUS RTU protocol.
  • Ethernet interface (TCP/IP) optional.
Relays
  • Alarm Relay s 1 summary alarm for ” analyzer failure”Maximum load:1A / 24 V
  • 2 potential-free contacts for each channel programmable as limit switches for measuring values (high/low thresholds)
  • 1 sample flow alarm for each channel
  • 1 output for indication of the active sample stream for each channel.
  • 1 output for maintenance indication.
For full details please view or download the Color DATE SHEET
Application
  • Color in Potable Water.
  • Color in Surface Water
Options

Analyzer

  • Seres OL Topaz Color (0-50 or 0-100 or 0-250 Hazen [or mg/l Pt or Cr-Co]) SOL–55.351.000

Range Configuration

  • 0-50 or 0-100 or 0-250 Contact Sales

Unit Configuration

  • Hazen or mg/l Pt or mg/l Cr-Co Contact Sales

Configuration

  • 2-Channel Setup (similar range) (similar range) SOL-83.590.020
  • 4-Channel Setup (similar range) (similar range) SOL-83.590.040
  • 6-Channel Setup (similar range) (similar range) SOL-83.590.060
  • Ethernet Interface (TCP/IP) SOL-81.410.020

Option

  • 1-Year Spare Part Package “Basis” (Analyzer + 1st channel) SOL-84.110.080
  • 1-Year Spare Part Package “Multi-Channel” (add once if multi-channel configuration was selected) SOL-84.110.150
  • Reagent shelf inf SS316L SOL-89.610.010

Reagent specifications

  • No Reagents Required
Downloads
pdf

Product Flyer Seres OL Topaz Analyzer Series

pdf
Datasheet Online Color Analyzer Topaz
F.A.Q
  • 2 programmable signal outputs for measured values (freely scalable, linear). Current loop:4 – 20 mA
  • Communication interface RS485 interface (galvanically separated) withModbus/JBUS RTU protocol.
  • Ethernet interface (TCP/IP) optional.

Relays

  • Alarm Relay s 1 summary alarm for ” analyzer failure”Maximum load:1A / 24 V
  • 2 potential-free contacts for each channel programmable as limit switches for measuring values (high/low thresholds)
  • 1 sample flow alarm for each channel
  • 1 output for indication of the active sample stream for each channel.
  • 1 output for maintenance indication.

All Swan Analyzers are CSA Certified before shipping.

Min 30 l/h

Optimum 40 l/h

 
Swan Canada Logo
Seres OL
Hanna Canada
FMI_carousel
Kobold Instrumentation
i-acd-icon.gif
ATI Gas Monitoring Logo
Burkert Canada
i-bwcontrols-icon.gif
Delta Instrument Canada
HF Scientific Canada
Intempco Canada
Multisensor Systems Canada
i-partech-icon.gif
Van London Canada
Walchem Canada