Industrial Chemical Pump - FMI QD Series

QD Series; High Speed, High Flows

Ideal For General Lab and Industrial Use

Industrial Chemical Pump
  • Description
  • Specification
  • Options
  • F.A.Q

FMI Pumps QD Series, industrial chemical pump is Ideal for general lab and industrial use. Featuring high speeds and high flow rates up to 2208 mL/min in either direction.

FMI Pumps feature the patented CeramPump® valveless piston pumping technology. The CeramPump® positive displacement design has one moving part in the fluid path, a sapphire-hard ceramic piston to perform all fluid control functions.

The elimination of valves minimizes downtime or the need for re-calibration and our long term drift-free performance delivers millions of “trouble-free” cycles at 1% precision or better.

Industrial Chemical Pump Features

  • Flow rate infinitely adjustable from 0 to 2208 mL/min in either direction
  • No valves to clog, hang up or service
  • Ceramic and fluorocarbon standard wetted materials
  • One moving part – piston
  • Drift-free performance
  • Flow rate infinitely adjustable up to max flow rate in either direction
  • Convenient multi-position tilt stand for wall or counter mounting
  • Rugged, long life, fan cooled, thermally protected, ball bearing motor
  • Optional: Available with Wash Glands as shown
Industrial Chemical Pump
Spec Value
Dimensions 9 3/4″ x 4 3/4″ x 5 3/8″(248 x 121 x 137mm)
Shipping Weight Shipping weight: 10 lb (4.5 kg)
Electrical 115 V AC, 60 Hz, 1Ø, 1.25 amps, 1/25 HP, 1725 RPM, shaded 4 pole, TEFC, sparkless, thermally protected with 3 prong power cord.Motor is UL recognized
Drive Options 230 VAC (50/60 Hz )* Part # -2 | Mounting Base Part # -MB | Dial Indicator Part # Q485 | Hazardous Duty Part #: QDX
Max Min Flow Rate (ML/MIN) 5.175 to 2208*
Pressure 25, 50 OR 100 PSIG, (1.7,  3.4 OR 6.9 BAR)
Operating Temp 60° C, 100° C or 177° C (140° F, 212° F or 350° F)
Wetted Materials: Piston Ceramic, Zirconia or 316 Stainless Steel
Wetted Materials: Cylinder Liner Carbon, Ceramic
Wetted Materials: Cylinder Case ETFE, PVDF or 316 Stainless Steel
Dispense Resolution MAX (ML/REV) 0.025, 0.05, 0.08, 0.1, 0.32, 0.72, 1.28
Dispense Resolution MIN (ML/REV) 0.003, 0.004, 0.005, 0.016, 0.032, 0.036, 0.064

*GENERAL SPECIFICATION NOTES FOR ALL PUMPS

  1. Physical characteristics of your pumped fluid may affect the rating/capacity relationships shown in the performance tables for each FMI pump.
  2. The maximum flow rates shown in the tables are for H2O at 2 psig.
  3. Flow rates are infinitely variable from zero to maximum capacities shown.
  4. Pumping capacities are reduced approximately 18% when the Pump Drive Module is operating on a 50 Hz electrical supply.
  5. Fluorocarbon cylinder cases (Q line only) are rated for a maximum pressure of 60 psig or the lower pressure shown in the charts.
  6. 3/8″ I.D. tubing or greater is required for flows higher than 500 mL/min.
  7. 1/2″ I.D. tubing or greater is required for flows higher than 1200 mL/min
MAX. Flow/PressurePump Drive ModulePiston Code
ML/MINPSIGBAR
43.141006.90QDRH00
86.25RH0
138.0Q0
172.50RH1
552*Q1
1242*503.45Q2
2208*251.72Q3
+
QD Drive Options
230 VAC (50/60 Hz )* Part # -2
Mounting Base  Part # -MB
Dial Indicator  Part # Q485
Hazardous Duty  Part #: QDX

QD Industrial Chemical Pump Series; Common Serial Numbers:

  1. QD-Q0SSY, QD-Q1CKC, QD-Q1CKY, QD-Q1CSC, QD-Q1CSY, QD-Q1CTC, QD-Q1SAN, QD-Q1SKY, QD-Q1SSY, QD-Q1STY,
  2. QD-Q2DKD, QD-Q2CKY, QD-Q2CSC, QD-Q2CSY, QD-Q2CTC, QD-Q2SAN, QD-Q2SKY, QD-Q2SSY, QD-Q2STY,
  3. QD-Q3CKC, QD-Q3CSC, QD-Q3CTC,
  4. QD-RH00SKY, QD-RH00STY, QD-RH00ZKC, QD-RH00ZTC, QD-RH0CKC, QD-RH0CTC, QD-RH1CKC, QD-RH1CTC
Accuracy of ± 1%. Can be expected for low to medium viscosity (1 – 500 cps) fluids providing, consistent precise output from microliters to full flow range.
The FMI pump is positive displacement and, in general, viscosity independent. However, viscous fluids should use lower RPM drives (400 RPM or less) with pump heads adjusted to longer piston strokes. There is no absolute value for the maximum viscosity an FMI pump can handle. For extremely viscous fluids, pressure feeding on the inlet side of the pump and/or heating of fluid are commonly used to aid in feeding fluid to the pump. FMI also manufactures temperature controlled pump heads “WT” to help maintain fluid temperatures up to 360 F as it flows through the pump.

On all pumps, flow rates may be altered when operating or at rest. On the “Q” line this is done by turning the Flow Control Knob which moves the flow rate indicator along a fixed 20 unit scale linearly calibrated “10-0-10”. The “10” equals 100% flow rate in that direction, “0” equals zero flow. To improve the fine adjustment of the flow rates on the “Q” line, there is an optional Dial Indicator Kit Q485 which provides for 1000 discrete settings. The “RH” line flow adjustment is accomplished by turning an easy-grip Flow Control Ring graduated in 450 divisions from 0 to 100% flow.

A variety of rotational sensors are available which will provide a signal for monitoring RPM. For pumps which utilize the standard Q style base, hall effect and proximity rotational sensors are available. For stepper motor driven pumps, opto-sensors can be provided.

Yes. Pumps will self prime to 15 feet vertical dry, 26 feet wet.

YES. FMI Sanitary Pump heads are designed for autoclaving, clean in place, or complete disassembly for brush cleaning. Cleaning procedures can be followed without loss of system operating efficiency.
Find the serial numbers on your unit and contact WJF customer service: 1 877 291 5572 – We can identify the exact configuration from your serial number. If you cannot find the serial numbers, please contact us and we will be happy to help guide you to their locations.

FMI Pumps QD Series, industrial chemical pump is Ideal for general lab and industrial use. Featuring high speeds and high flow rates up to 2208 mL/min in either direction.

FMI Pumps feature the patented CeramPump® valveless piston pumping technology. The CeramPump® positive displacement design has one moving part in the fluid path, a sapphire-hard ceramic piston to perform all fluid control functions.

The elimination of valves minimizes downtime or the need for re-calibration and our long term drift-free performance delivers millions of “trouble-free” cycles at 1% precision or better.

Industrial Chemical Pump Features

  • Flow rate infinitely adjustable from 0 to 2208 mL/min in either direction
  • No valves to clog, hang up or service
  • Ceramic and fluorocarbon standard wetted materials
  • One moving part – piston
  • Drift-free performance
  • Flow rate infinitely adjustable up to max flow rate in either direction
  • Convenient multi-position tilt stand for wall or counter mounting
  • Rugged, long life, fan cooled, thermally protected, ball bearing motor
  • Optional: Available with Wash Glands as shown
Industrial Chemical Pump
Spec Value
Dimensions 9 3/4″ x 4 3/4″ x 5 3/8″(248 x 121 x 137mm)
Shipping Weight Shipping weight: 10 lb (4.5 kg)
Electrical 115 V AC, 60 Hz, 1Ø, 1.25 amps, 1/25 HP, 1725 RPM, shaded 4 pole, TEFC, sparkless, thermally protected with 3 prong power cord.Motor is UL recognized
Drive Options 230 VAC (50/60 Hz )* Part # -2 | Mounting Base Part # -MB | Dial Indicator Part # Q485 | Hazardous Duty Part #: QDX
Max Min Flow Rate (ML/MIN) 5.175 to 2208*
Pressure 25, 50 OR 100 PSIG, (1.7,  3.4 OR 6.9 BAR)
Operating Temp 60° C, 100° C or 177° C (140° F, 212° F or 350° F)
Wetted Materials: Piston Ceramic, Zirconia or 316 Stainless Steel
Wetted Materials: Cylinder Liner Carbon, Ceramic
Wetted Materials: Cylinder Case ETFE, PVDF or 316 Stainless Steel
Dispense Resolution MAX (ML/REV) 0.025, 0.05, 0.08, 0.1, 0.32, 0.72, 1.28
Dispense Resolution MIN (ML/REV) 0.003, 0.004, 0.005, 0.016, 0.032, 0.036, 0.064

*GENERAL SPECIFICATION NOTES FOR ALL PUMPS

  1. Physical characteristics of your pumped fluid may affect the rating/capacity relationships shown in the performance tables for each FMI pump.
  2. The maximum flow rates shown in the tables are for H2O at 2 psig.
  3. Flow rates are infinitely variable from zero to maximum capacities shown.
  4. Pumping capacities are reduced approximately 18% when the Pump Drive Module is operating on a 50 Hz electrical supply.
  5. Fluorocarbon cylinder cases (Q line only) are rated for a maximum pressure of 60 psig or the lower pressure shown in the charts.
  6. 3/8″ I.D. tubing or greater is required for flows higher than 500 mL/min.
  7. 1/2″ I.D. tubing or greater is required for flows higher than 1200 mL/min
MAX. Flow/PressurePump Drive ModulePiston Code
ML/MINPSIGBAR
43.141006.90QDRH00
86.25RH0
138.0Q0
172.50RH1
552*Q1
1242*503.45Q2
2208*251.72Q3
+
QD Drive Options
230 VAC (50/60 Hz )* Part # -2
Mounting Base  Part # -MB
Dial Indicator  Part # Q485
Hazardous Duty  Part #: QDX

QD Industrial Chemical Pump Series; Common Serial Numbers:

  1. QD-Q0SSY, QD-Q1CKC, QD-Q1CKY, QD-Q1CSC, QD-Q1CSY, QD-Q1CTC, QD-Q1SAN, QD-Q1SKY, QD-Q1SSY, QD-Q1STY,
  2. QD-Q2DKD, QD-Q2CKY, QD-Q2CSC, QD-Q2CSY, QD-Q2CTC, QD-Q2SAN, QD-Q2SKY, QD-Q2SSY, QD-Q2STY,
  3. QD-Q3CKC, QD-Q3CSC, QD-Q3CTC,
  4. QD-RH00SKY, QD-RH00STY, QD-RH00ZKC, QD-RH00ZTC, QD-RH0CKC, QD-RH0CTC, QD-RH1CKC, QD-RH1CTC
Accuracy of ± 1%. Can be expected for low to medium viscosity (1 – 500 cps) fluids providing, consistent precise output from microliters to full flow range.
The FMI pump is positive displacement and, in general, viscosity independent. However, viscous fluids should use lower RPM drives (400 RPM or less) with pump heads adjusted to longer piston strokes. There is no absolute value for the maximum viscosity an FMI pump can handle. For extremely viscous fluids, pressure feeding on the inlet side of the pump and/or heating of fluid are commonly used to aid in feeding fluid to the pump. FMI also manufactures temperature controlled pump heads “WT” to help maintain fluid temperatures up to 360 F as it flows through the pump.

On all pumps, flow rates may be altered when operating or at rest. On the “Q” line this is done by turning the Flow Control Knob which moves the flow rate indicator along a fixed 20 unit scale linearly calibrated “10-0-10”. The “10” equals 100% flow rate in that direction, “0” equals zero flow. To improve the fine adjustment of the flow rates on the “Q” line, there is an optional Dial Indicator Kit Q485 which provides for 1000 discrete settings. The “RH” line flow adjustment is accomplished by turning an easy-grip Flow Control Ring graduated in 450 divisions from 0 to 100% flow.

A variety of rotational sensors are available which will provide a signal for monitoring RPM. For pumps which utilize the standard Q style base, hall effect and proximity rotational sensors are available. For stepper motor driven pumps, opto-sensors can be provided.

Yes. Pumps will self prime to 15 feet vertical dry, 26 feet wet.

YES. FMI Sanitary Pump heads are designed for autoclaving, clean in place, or complete disassembly for brush cleaning. Cleaning procedures can be followed without loss of system operating efficiency.
Find the serial numbers on your unit and contact WJF customer service: 1 877 291 5572 – We can identify the exact configuration from your serial number. If you cannot find the serial numbers, please contact us and we will be happy to help guide you to their locations.