pH Sensors, ORP, Conductivity, ISE Sensors and Sensor Assemblies
A large selection of quality pH Sensors available for shipping from our location in Calgary, Alberta, Canada.
We stock a large selection of replacement pH Sensors. Designed to outperform original manufacturer specifications. Available for shipping from our location in Calgary, Alberta, Canada. Below is a small selection out of our vast catalogue of sensor configurations.
Call Canada 1-877 291 5572 with your current OEM Part Numbers for Quick Cross-Referencing.
Our manufacturer of high quality replacement and original electrochemical analytical sensors. They specialize in manufacturing pH, ORP (Oxidation-Reduction Potential), Conductivity, Oxygen and Ion Selective Electrodes (ISEs) designed for Laboratory, Industrial, Biotechnology and Medical applications.
- Yokogawa® Replacement Sensors - pH Sensors
- TBI/ABB/Bailey/Barben Replacement pH Sensors
- Honeywell (L&N) Replacement pH Sensors
- Laboratory pH Sensors and Ion Selective (ISE) Sensors.
- Rosemount® Analytical Replacement pH Sensor Assemblies
- Low-Cost Tuff Tip® pH & ORP Electrodes
- Low-Cost Combination pH Electrodes
- Disposable Combination Electrode
- Toroidal Conductivity Sensor
- Toroidal Conductivity Loop Powered Transmitter Sensor
- Twist-Lock Series For pH or ORP Applications
- LiveTap™ pH / ORP Industrial Insertion Sensor Assembly
- Mark X Pneumatic Retractable Sensor Assembly
- Submersible Sensors for pH, ORP, & Conductivity
- Retractable Lock-N-Load Sensor Assembly
- Mark 7 Series For pH And ORP Applications (Hot Tap)
Yokogawa® Replacement Sensors – PH
Improved Life and Performance
Van London-Phoenix Co. sensors electrode designs have been field proven in a variety of harsh applications. In most cases, direct replacements will actually outperform original equipment specifications.
Easy, Low Cost Replacement
Direct replacements are dimensionally matched to existing equipment so that no expensive retrofit changes are necessary. For standardization, simply remove the original element and replace with a Van London-Phoenix Co. equivalent
Quick Order Turn-around
Housed electrodes consist of two parts: a housing and an electrode. Housings are machined to accept any number of stocked 12mm electrodes and require minimal factory assembly for shipment.
Custom Styles
Housings can be machined from numerous materials with several electrode guard designs and various insertion depths. Custom electrode designs can maximize sensor in harsh environments.
Call 1-877 291 5572 with Yokogawa® Part Numbers for Quick Cross-Referencing.
TBI/ABB/Bailey/Barben Replacement Sensors – 551,556,557,564,567 Series PH Sensors
This series of Van London – pHoenix Company sensors are designed to retrofit the TBI/Bailey sensor assemblies. They are manufactured with a unique solid reference gel for extended life in the most severe applications.
Constructed of chemically resistant PVDF, with a porous Magna-Flow and/or a wood junction.
Including pH sensors, ORP and ion selective electrode applications. These electrodes are now available with solution ground. Two unique options are available. The first option is manufacturing the electrode housing made of a chemically resistant conductive Ryton/Graphite. Option 2 is using an exposed platinum band located near the reference and pH bulb. Either of these options will work quite well in conjunction with the Van London – pHoenix Company Differential Preamp for problem plagued applications.
Improved Life and Performance
In most cases, direct replacements will actually outperform original equipment specifications.
Easy, Low Cost Replacement
No expensive retrofit changes are necessary. For standardization, simply remove the original element and replace with a Van London-Phoenix Co. equivalent
Quick Order Turn-around
Housed electrodes consist of two parts: a housing and an electrode. Housings are machined to accept any number of stocked 12mm electrodes and require minimal factory assembly for shipment.
Custom Styles
Housings can be machined from numerous materials with several electrode guard designs and various insertion depths. Custom electrode designs can maximize sensor in harsh environments.
Call 1-877 291 5572 with TBI/ABB/BailyBarben Part Numbers for Quick Cross-Referencing.
Honeywell (L&N) Replacement pH Sensors
Improved Life and Performance
Electrode designs have been field proven in a variety of harsh applications. In most cases, direct replacements will actually outperform original equipment specifications.
Easy, Low Cost Replacement
Direct replacements are dimensionally matched to existing equipment so that no expensive retrofit changes are necessary. For standardization, simply remove the original element and replace with a Van London-Phoenix Co. equivalent
Quick Order Turn-around
Housed electrodes consist of two parts: a housing and an electrode. Housings are machined to accept any number of stocked 12mm electrodes and require minimal factory assembly for shipment.
Custom Styles
Housings can be machined from numerous materials with several electrode guard designs and various insertion depths. Custom electrode designs can maximize sensor in harsh environments.
Laboratory pH Sensors and Ion Selective (ISE) Sensors.
All of our Ion Selective (ISE) electrodes are available in many shapes and lengths to fit a wide variety of applications.
These Ion Selective Electrodes are designed to work with any modern pH/mV meter, ISE/concentration meter, or suitable on-line instrumentation.
Our Electrodes have several advantages over colorimetric, gravimetric, and other methods:
- They can be used from 0.1 to 10,000 ppm.
- The ISE electrode bodies are shock-proof and chemically-resistant.
- Once calibrated, can monitor concentration continuously and analyze the sample within 1 to 2 minutes.
- Can be placed directly into the sample without sample pre-treatment or destruction of the sample.
- Inexpensive and great screening tools for identifying dissolved salts in samples.
Currently we manufacture sensors for numerous specific ion measurements. These can be supplied with various options including Mono or Combination, Sealed or Refillable, Rebuildable Sensing Tips, Flushable Reference Junctions and Specialized Reference Electrodes to minimize interference. Direct Replacements are available for all major brands.
VLC currently offers the following Ion Selective Electrodes (ISE):
| Ammonia (NH3) | Ammonium (NH4+) | Bromide (Br–) | Cadmium (Cd+2) | Calcium (Ca+2) |
| Chloride (Cl–) | Copper (Cu+2) | Cyanide (CN–) | Fluoride (F–) | Fluoroborate (BF4–) |
| Iodide (I–) | Lead (Pb+2) | Nitrate (NO3–) | Nitrogen Oxide (NOx) | Perchlorate (ClO4–) |
| Potassium (K+) | Silver (Ag+) | Sodium (Na+) | Sulfide (S–) | Surfactant |
| Water Hardness | Magnesium (Mg+2) | |||
Call 1-877 291 5572 with your OEM Part Numbers for Quick Cross-Referencing.
Rosemount® Analytical Replacement Sensor Assemblies.
Van London Co. (aka Van London pHoenix Co.) Rosemount® pH Sensor. Replacement sensors have been field proven in a variety of harsh applications. An inventory stocking arrangement reduces lead times from weeks to days. Housed electrodes generally consist of two parts: a 12mm glass-bodied electrode and housing machined to accept that electrode. Minimal factory assembly is required before shipment to the customer site.
Call 1-877 291 5572 with Rosemount Part Numbers for Quick Cross-Referencing.
Van London pHoenix Co. P822 Low-Cost Tuff Tip® pH & ORP Electrodes
Low Cost Disposable Tuff Tip® Combination Electrode
This series of low cost electrodes are designed for reliable pH measurements either in-line or in submersible applications. The simplified construction, designed with the user in mind, does not require electrolyte replenishment or any component replacement.
The sensor is housed in a molded, chemically resistant CPVC body with Viton® O-Rings. Complete encapsulation eliminates process intrusion. The sensor features a Magna-Sens® peripheral ceramic junction along with a Tuff Tip® guarded tip with self cleaning features. The Magna-Sens double junction provides a longer life in process solutions containing ammonia, chlorine, cyanides,sulfides, or other poisoning ions.
The P822 is available with integral temperature compensation and an optional 316 stainless steel solution ground.
Installation is easily achieved through a wide variety of mounting configurations. Featured are ¾ Inch (MNPT)front and rear facing process connections for submersion or flow through applications.
Call 1-877 291 5572 with your OEM Part Numbers for Quick Cross-Referencing.
Van London pHoenix Co. P721 Low-Cost Combination pH Electrodes
Low Cost Disposable Combination Electrode
This series of low cost electrodes are designed for reliable pH or ORP measurements either in-line orin submersible applications. The simplified construction, designed with the user in mind, does not require electrolyte replenishment or any component replacement.
The sensor is housed in a molded, chemically resistant Ryton® body with Viton® O-Rings.
Complete encapsulation eliminates process intrusion. The sensor features our MagnaSens® peripheral ceramic junction along with a guarded tip.The MagnaSens® double junction provides a longer life in process solutions containing ammonia,chorine, cyanides, sulfides or other poisoning ions.
The P721 is available with integral temperature compensation. An optional platinum solution ground for self-diagnostic pH analyzers is also available.
Designed for use on most manufacturers instruments.Installation is easily achieved through a wide variety of mounting configurations. Featured are ¾inch (MNPT) front and rear facing process connections for submersible or flow through applications.
Call 1-877 291 5572 with your OEM Part Numbers for Quick Cross-Referencing.
Model P821 Disposable Combination Electrode
Specially designed for convenience of electrode replacement where minimal troubleshooting and maintenance downtime are of prime importance.
It is suitable for virtually all applications where a high performance sensor is required, either in-line or submersible installation.
The electrode features a detachable cable with an integral pre amplifier which eliminates any ground loop problems. The pre amp converts the high impedance signal into a stable, noise free signal.
The sensor is housed in a chemically resistant, graphite filled Ryton® with Viton® O-Rings. The graphite filled Ryton body is used as a solution ground.
The electrode tip is constructed in a unique Tuff Tip® guarded tip design with a Magna-Sens® peripheral ceramic reference junction. TheMagna-Sens reference junction provides longer life in harsh, dirty applications and in process solutions containing a high solid content.
It is also superior in applications such as lime slurry waste treatment, paper machine headbox and pigment / dye applications.
The reference does not require electrolyte replenishment during the life of the electrode.
Call 1-877 291 5572 with your OEM Part Numbers for Quick Cross-Referencing.
Toroidal Conductivity Sensor
The Van London Co.(VLC) Toroidal Conductivity is perfect for applications that would foul or attack the metal of contacting sensors. Toroidal sensors are also desired for use in high conductivity ranges or % concentration. Primary features include: low cost, durable Polypropylene construction, submersible or in-line mounting, and ease of maintenance. The sesensors can be paired with the Knick analyzer or others commercially available.
Call 1-877 291 5572 with your OEM Part Numbers for Quick Cross-Referencing.
Toroidal Conductivity Loop Powered Transmitter Sensor
This Conductivity monitoring system consists of a loop powered transmitter and an electrodeless conductivity sensor in a single package. Temperature compensation is accomplished with a RTD Pt100 built-in to sensor.
Application includes water treatment, cooling tower and water monitoring.
Principle of Operation:
When the electrodeless Conductivity sensor is immersed in the solution to be measured a conductive loop is created through the two toroidally wound coils. An alternating current is applied to one of the coils, which includes a current in the conductive loop. The second coil is used to measure the Conductivity, which is proportional to the induced current in the solution.
The advantages of the electrodeless method are more apparent in measurement applications in which electrode contamination and polarization of a conventional Conductivity system can lead to erroneous readings
Call 1-877 291 5572 with your OEM Part Numbers for Quick Cross-Referencing.
Twist-Lock Series For pH or ORP Applications
The Twist-Lock sensor and adapter is designed to convert a standard pipe tee into a low cost, low maintenance flow-through pH sensor, or any sensor type assembly. Only a ¼ turn is required for field maintenance or sensor replacement; threading is eliminated. The adapter is available in a variety of materials & connection sizes for easy installation.
Application
The Van London-Phoenix Co. Twist-Lock mounting system provides continuous pH, ORP, or Conductivity monitoring with safe and convenient service capability for any flow-through system. Typical installations include by-pass streams, sample systems, or sensor stations.
Call 1-877 291 5572 with your OEM Part Numbers for Quick Cross-Referencing.
LiveTap™ pH / ORP Industrial Insertion Sensor Assembly
The LiveTap™ Insertion Assembly is ideal for use in areas where down time is critical by allowing removal of the electrode from a live line or tank without process interruption. Fitted with a 1.5” ball valve, the pH or ORP electrode can be removed for maintenance by sliding the 316L Stainless Steel sheath through the valve and closing it off. Your unit is now safe to remove.
What is unique about the Industrial Insertion Hardware is the fact that it allows you to use various types of electrodes without changing hardware. The TP571 series electrode is available for virtually any application that requires constant monitoring or control. They are manufactured to adapt to most controller / transmitters in existence today. It also offers improvements in electrode design by using a large surface Magna-Sens™ reference junction and a solid polymer reference gel.
Call 1-877 291 5572 with your OEM Part Numbers for Quick Cross-Referencing.
Mark X Pneumatic Retractable pH Sensor Assembly for pH and ORP
Low Cost Electrode Replacement
An all-in-one electrode design incorporates the measuring, reference, and optional automatic temperature compensator (ATC) in one reducing inventory requirements.
O-ring and Ball Valve Arrangement
Prevents process spray or process contamination of junction box or conduit, even in the event of electrode breakage.
Automatic Cleaning Capabilities
Use of select microprocessor-based analyzers or a DCS will enable the assembly for automatic cleaning or calibration.
Quality “Built In”
All Van London-Phoenix Co.assemblies and electrodes meet strict, documented quality specifications, followed through each step of the manufacturing process.
Call 1-877 291 5572 with your OEM Part Numbers for Quick Cross-Referencing.
Submersible Sensors for pH, ORP, & Conductivity Applications
The Mark I-A and Mark VI-B sensors will continuously monitor pH, ORP, and Conductivity in tanks, vessels, or canals where liquid levels tend to vary. Typical applications include chlorine cells, latex coagulation tanks, and effluent sumps. It can be installed in atmospherically sealed vessels with use of a tank mount fitting (sold separately).
Design Advantages
The Mark 1-A sensor was designed to be ordered as a complete assembly which does not require additional labor or materials (extension pipes, water sealants, wiring adapters or connectors).
This sensor is supplied with a removable guard. The removable guard will simplify cleaning and reduce down-time as well as maintenance expense. Van London-Phoenix Co. has the capability of supplying the numerous electrode designs for maximum electrode life. Furthermore, the Mark 1-A can be customized to mate up with any pH/ORP transmitter commercially available.
The Mark VI-B incorporates a removable drilled guard for optimum protection against electrode breakage. “Front Load” electrode replacement requires minimal disassembly. An all-in-one electrode (measuring, reference and ATC) reduces replacement costs and inventory requirements.
Call 1-877 291 5572 with your OEM Part Numbers for Quick Cross-Referencing.
Retractable Lock-N-Load pH Sensor or ORP Assembly
All you need to do is Lock-N-Load to install a pH or ORP electrode into any pipeline.
This is the first in-line assembly that doesn’t require ball valves, cables, or costly, complex hardware to quickly insert or remove an electrode from a pipeline without interrupting the process.
The simplicity of its design is what makes it unique. A quarter turn, a pull, and the electrode is isolated from line pressure.
The electrode can now be removed to check calibration.
Available in a variety of materials including CPVC, Kynar and Stainless Steel. A wide selection of pH and ORP electrodes are available for the retractable sensor assembly.
Call 1-877 291 5572 with your OEM Part Numbers for Quick Cross-Referencing.
Mark 7 Series For pH And ORP Applications (Hot Tap)
The Mark 7 insertion assemblies permit continuous pH or ORP monitoring in pressurized vessels or lines. Specifications are for mounting onto a weldalet, a pipe tee or flange. To reduce the maintenance downtime required, electrode connections terminate inside an explosion-proof junction box which houses the preamp as well.
Application
The Mark 7 insertion assemblies permit continuous pH or ORP monitoring in pressurized vessels or lines. Specifications are for mounting onto a weldalet, a pipe tee or flange. To reduce the maintenance downtime required, electrode connections terminate inside an explosion-proof junction box which houses the preamp as well.
Safe Operation
Mark 7 assemblies can be safely removed and replaced under pressure without process shutdown. Electrode o-ring arrangement seals the electrode from leaking, even in the event of breakage.
Call 1-877 291 5572 with your OEM Part Numbers for Quick Cross-Referencing.
