Portable pH Monitor Quality Assurance Inspector

AMI Inspector pH

Portable inspection equipment for quality assurance of pH monitors.

Portable pH Inspector
  • Description
  • Specification
  • Application
  • Options
  • Downloads
  • F.A.Q.

The portable AMI pH INSPECTOR is a complete monitoring system mounted on a small panel with supporting stand and a rechargeable battery for stand-alone operation, designed as an inspection equipment for quality assurance of online, pH process monitors.

Portable pH Monitor Features:

Complete portable system mounted on small, aluminum panel:

  • Measurement range: 1 to 12 pH
  • Rechargeable battery for stand-alone operation for at least 24 hours.
  • Transmitter AMI INSPECTOR pH in a rugged aluminum enclosure (IP 66).
  • Swansensor pH SI combined electrode with liquid electrolyte.
  • Flow cell QV-Flow IS1000 made of stainless steel with quick release vessel, flow adjustment valve, digital sample flow meter and temperature sensor.
  • Carrying case.
  • USB Stick for data logging.
  • Factory tested, ready for installation and operation.
pH Inspector
Specifications:
  • Measuring range: 1 to 12 pH.
  • Big LC display for the reading of measuring value, sample temperature, sample flow, temperature compensation type, operating status and battery charge condition.
  • Easy user menus in English, German, French and Spanish. Simple programming of all parameters by keypad.
  • Electronic record of major process events and calibration data.
  • Data logger for 1’500 data records stored at a selectable interval.
  • One current output (0/4 – 20 mA) for measured signal.
Measuring range: 1.00 to 12.00 pH
Resolution: 0.01 pH
Power supply: 85 – 265 VAC; 50/60Hz
Stand-alone operating time: > 24 hours
Sample flow rate: 5 to 10 l/h
Sample temperature: up to 50°C
Process connection Inlet: Swagelok ¼” tube adapter
Process connection Outlet: Ø 16 mm, tubing 15 x 20 mm
Total weight: 4.5 kg
Detailed Specification can be found on Page 2 of the Portable pH monitor Data Sheet.
  • Feed Water.
  • Pure and Ultrapure Water Applications.
  • Power Plants.
Consumables
  • A-85.113.300 Calibration solution pH 7 40ml
  • A-85.114.300 Calibration solution pH 9 40ml
  • A-85.119.010 pH-Calibration set (1x pH 7, 1x pH 9, each 40 ml)
  • A-87.893.300 Filling solution 3,5M, 30 ml
  • A-87.893.500 Filling solution 3,5M for Swansensor pH SI+FL; 200ml
  • A-87.893.600 Filling solution 3,5M for Swansensor pH SI+FL; 500ml
Accessories
  • A-97.017.100 Quality certification of complete Inspector pH
Spare parts
  • A-87.110.200 Swansensor pH SI
  • A-88.121.120 Sensor cable 0.4 meters sleeves/screw plug
  • A-89.819.020 Exchange battery for AMI Inspector; V2
  • C-89.700.030 Case Inspector
  • C-89.819.010 Power adapter for AMI Inspector; V2
  • 2 Relay outputs Two potential-free contacts program-able as limit switches for measuring values, controllers or timer with automatic hold function. Rated load: 1A / 250 VAC
  • 2 Signal outputs (3rd as option)Two programmable signal outputs for measured values (freely scalable, linear or bi-linear) or as continuous control out-put (control parameters programmable) as current source. 3rd signal output selectable as current source or current sink. Current loop: 0/4 – 20 mA Maximum burden: 510 Ω
  • Optional Profibus- / Modbus Interface
  • Optional HART Interface
  • Optional USB Interface
  • Optional Third 0/4 – 20  mA Output

All Swan Analyzers are CSA Cirtified at our premises before shipping.

Flow rate: 5 to 10 L/h

The portable AMI pH INSPECTOR is a complete monitoring system mounted on a small panel with supporting stand and a rechargeable battery for stand-alone operation, designed as an inspection equipment for quality assurance of online, pH process monitors.

Portable pH Monitor Features:

Complete portable system mounted on small, aluminum panel:

  • Measurement range: 1 to 12 pH
  • Rechargeable battery for stand-alone operation for at least 24 hours.
  • Transmitter AMI INSPECTOR pH in a rugged aluminum enclosure (IP 66).
  • Swansensor pH SI combined electrode with liquid electrolyte.
  • Flow cell QV-Flow IS1000 made of stainless steel with quick release vessel, flow adjustment valve, digital sample flow meter and temperature sensor.
  • Carrying case.
  • USB Stick for data logging.
  • Factory tested, ready for installation and operation.
pH Inspector
Specifications:
  • Measuring range: 1 to 12 pH.
  • Big LC display for the reading of measuring value, sample temperature, sample flow, temperature compensation type, operating status and battery charge condition.
  • Easy user menus in English, German, French and Spanish. Simple programming of all parameters by keypad.
  • Electronic record of major process events and calibration data.
  • Data logger for 1’500 data records stored at a selectable interval.
  • One current output (0/4 – 20 mA) for measured signal.
Measuring range: 1.00 to 12.00 pH
Resolution: 0.01 pH
Power supply: 85 – 265 VAC; 50/60Hz
Stand-alone operating time: > 24 hours
Sample flow rate: 5 to 10 l/h
Sample temperature: up to 50°C
Process connection Inlet: Swagelok ¼” tube adapter
Process connection Outlet: Ø 16 mm, tubing 15 x 20 mm
Total weight: 4.5 kg
Detailed Specification can be found on Page 2 of the Portable pH monitor Data Sheet.
  • Feed Water.
  • Pure and Ultrapure Water Applications.
  • Power Plants.
Consumables
  • A-85.113.300 Calibration solution pH 7 40ml
  • A-85.114.300 Calibration solution pH 9 40ml
  • A-85.119.010 pH-Calibration set (1x pH 7, 1x pH 9, each 40 ml)
  • A-87.893.300 Filling solution 3,5M, 30 ml
  • A-87.893.500 Filling solution 3,5M for Swansensor pH SI+FL; 200ml
  • A-87.893.600 Filling solution 3,5M for Swansensor pH SI+FL; 500ml
Accessories
  • A-97.017.100 Quality certification of complete Inspector pH
Spare parts
  • A-87.110.200 Swansensor pH SI
  • A-88.121.120 Sensor cable 0.4 meters sleeves/screw plug
  • A-89.819.020 Exchange battery for AMI Inspector; V2
  • C-89.700.030 Case Inspector
  • C-89.819.010 Power adapter for AMI Inspector; V2
  • 2 Relay outputs Two potential-free contacts program-able as limit switches for measuring values, controllers or timer with automatic hold function. Rated load: 1A / 250 VAC
  • 2 Signal outputs (3rd as option)Two programmable signal outputs for measured values (freely scalable, linear or bi-linear) or as continuous control out-put (control parameters programmable) as current source. 3rd signal output selectable as current source or current sink. Current loop: 0/4 – 20 mA Maximum burden: 510 Ω
  • Optional Profibus- / Modbus Interface
  • Optional HART Interface
  • Optional USB Interface
  • Optional Third 0/4 – 20  mA Output

All Swan Analyzers are CSA Cirtified at our premises before shipping.

Flow rate: 5 to 10 L/h