Portable Oxygen Monitor for Trace Dissolved Oxygen
The portable AMI INSPECTOR is a complete monitoring system mounted on a small panel with supporting stand and a rechargeable battery for stand-alone operation, designed as an inspection equipment for quality assurance of online, trace oxygen process monitors.
Portable Oxygen Monitor Features:
- Measurement range:
- 0.01ppb to 20ppm O2 (at 25°C) or
- 0 to 200% saturation
- Complete portable system mounted on small, aluminum panel.
- Transmitter AMI INSPECTOR Oxygen in a rugged aluminum enclosure (IP 66).
- Swansensor Oxytrace G with three electrode setup (cathode, anode and guard) and integrated NT5k temperature sensor.
- Flow cell QV-Flow PMMA OTG made of acrylic glass with needle valve and digital sample flow meter.
- Rechargeable battery for stand-alone operation.
- Carrying case
- USB Stick for data logging.
- Factory tested, ready for installation and operation.
- Rechargeable battery for stand-alone operation for at least 24 hours.
Specifications:
- Transmitter in aluminum housing (IP 66) with 2 relays as limit switch or controller or timer, 1 alarm relay as summary alarm contact, 1 input for potential-free contact. Including USB Interface with 1 signal output for measuring value or for continuous control.
- Flow cell QV-Flow PMMA OTG made of acrylic glass with needle valve and digital sample flow meter.
- Swansensor Oxytrace G with three electrode setup (cathode, anode and guard) and integrat-ed NT5k temperature sensor.
- Rechargeable battery for stand-alone operation of at least 24 hours.
- Big LC display for the reading of measuring value, sample temperature, sample flow, operating status and battery charge condition.
- Easy user menus in English, German, French and Spanish. Simple programming of all parameters by keypad.
- Electronic record of major process events and calibration data.
- Data logger for 1’500 data records stored at a selectable interval. One current output (0/4 – 20 mA) for measured signal.
- Optional: Instrument certificate
- Water Steam Cycle.
- Feed Water.
- Pure and Ultrapure Water Applications.
- Power Plants.
Consumables
- A-87.290.050 Sensor Cap Oxytrace G
- A-87.290.060 DO Filling Solution; 1ALK
Accessories
- A-97.017.200 Quality certification of complete Inspector Oxygen
Spare parts
- A-83.910.030 Mounting set for sensors 32 mm, without pressure.
- A-89.819.020 Exchangebattery for AMI Inspector; V2.
- C-89.700.030 Case Inspector.
- C-89.819.010 Poweradapter for AMI Inspector; V2.
- 2 Relay outputs Two potential-free contacts program-able as limit switches for measuring values, controllers or timer with automatic hold function. Rated load: 1A / 250 VAC
- 2 Signal outputs (3rd as option)Two programmable signal outputs for measured values (freely scalable, linear or bi-linear) or as continuous control out-put (control parameters programmable) as current source. 3rd signal output selectable as current source or current sink. Current loop: 0/4 – 20 mA Maximum burden: 510 Ω
- Optional Profibus- / Modbus Interface
- Optional HART Interface
- Optional USB Interface
- Optional Third 0/4 – 20 mA Output
All Swan Analyzers are CSA Cirtified at our premises before shipping.
8 to 25 l/h
Description
Portable Oxygen Monitor for Trace Dissolved Oxygen
The portable AMI INSPECTOR is a complete monitoring system mounted on a small panel with supporting stand and a rechargeable battery for stand-alone operation, designed as an inspection equipment for quality assurance of online, trace oxygen process monitors.
Portable Oxygen Monitor Features:
- Measurement range:
- 0.01ppb to 20ppm O2 (at 25°C) or
- 0 to 200% saturation
- Complete portable system mounted on small, aluminum panel.
- Transmitter AMI INSPECTOR Oxygen in a rugged aluminum enclosure (IP 66).
- Swansensor Oxytrace G with three electrode setup (cathode, anode and guard) and integrated NT5k temperature sensor.
- Flow cell QV-Flow PMMA OTG made of acrylic glass with needle valve and digital sample flow meter.
- Rechargeable battery for stand-alone operation.
- Carrying case
- USB Stick for data logging.
- Factory tested, ready for installation and operation.
- Rechargeable battery for stand-alone operation for at least 24 hours.
Specifications
Specifications:
- Transmitter in aluminum housing (IP 66) with 2 relays as limit switch or controller or timer, 1 alarm relay as summary alarm contact, 1 input for potential-free contact. Including USB Interface with 1 signal output for measuring value or for continuous control.
- Flow cell QV-Flow PMMA OTG made of acrylic glass with needle valve and digital sample flow meter.
- Swansensor Oxytrace G with three electrode setup (cathode, anode and guard) and integrat-ed NT5k temperature sensor.
- Rechargeable battery for stand-alone operation of at least 24 hours.
- Big LC display for the reading of measuring value, sample temperature, sample flow, operating status and battery charge condition.
- Easy user menus in English, German, French and Spanish. Simple programming of all parameters by keypad.
- Electronic record of major process events and calibration data.
- Data logger for 1’500 data records stored at a selectable interval. One current output (0/4 – 20 mA) for measured signal.
- Optional: Instrument certificate
Application
- Water Steam Cycle.
- Feed Water.
- Pure and Ultrapure Water Applications.
- Power Plants.
Options
Consumables
- A-87.290.050 Sensor Cap Oxytrace G
- A-87.290.060 DO Filling Solution; 1ALK
Accessories
- A-97.017.200 Quality certification of complete Inspector Oxygen
Spare parts
- A-83.910.030 Mounting set for sensors 32 mm, without pressure.
- A-89.819.020 Exchangebattery for AMI Inspector; V2.
- C-89.700.030 Case Inspector.
- C-89.819.010 Poweradapter for AMI Inspector; V2.
F.A.Q.
- 2 Relay outputs Two potential-free contacts program-able as limit switches for measuring values, controllers or timer with automatic hold function. Rated load: 1A / 250 VAC
- 2 Signal outputs (3rd as option)Two programmable signal outputs for measured values (freely scalable, linear or bi-linear) or as continuous control out-put (control parameters programmable) as current source. 3rd signal output selectable as current source or current sink. Current loop: 0/4 – 20 mA Maximum burden: 510 Ω
- Optional Profibus- / Modbus Interface
- Optional HART Interface
- Optional USB Interface
- Optional Third 0/4 – 20 mA Output
All Swan Analyzers are CSA Cirtified at our premises before shipping.
8 to 25 l/h
