Online Silica Analyzer

Seres Topaz Silica

The continuous measurement of silica in process water, surface water, wastewater and effluents.

Online Silica Analyzer

Complete monitoring system for the automatic, continuous measurement of silica in process water, surface water, wastewater and effluents.

For the continuous, colorimetric online determination of Silica.

Available in separate measuring ranges:
- Seres OL Topaz Silica MR: 0 to 20 ppm
- Seres OL Topaz Silica HR: 0 to 50 ppm
- Seres OL Topaz Silica HRx2: 0 to 100 ppm
Complete system including measurement and control electronics, measuring unit, flow indicator, reaction chamber and reagent dosing system.
Robust, high quality analyzer cabinet painted stainless steel, 316L.
Automatic, electrical zero measurement prior to each measurement cycle.
Automatic cell cleaning.
3 easily accessible peristaltic pump modules (4 for HRx2) for accurate, automatic dosing of chemical reagents.
2 analog and 6 digital outputs for alarms for process values and diagnostic alarms for each sample stream.
RS485 Modbus/JBUS RTU interface.
Large back-lit touchscreen color LCD display for the reading of all measured values and status information simultaneously.
Easy menu-guided operation in English or French.

The Serez OL Topaz series provides you with a high-quality industrial-grade Silica analyzer specific to your analysis requirement.

Molybdate method; colorimetric determination of silica ions.

Reaction time 15 min.
Reaction time 17 min.

Topaz Silica MR 0-20 ppm
- Limit of Detection < 0.1 ppm
- Repeatability ± 2 % FS
- Accuracy ± 2 % FS

Topaz Silica HR 0-50 ppm
- Limit of Detection 0.5 ppm
- Repeatability ± 2 % FS
- Accuracy ± 2 % FS

Topaz Silica HRx2 0-100 ppm
- Limit of Detection 1 ppm
- Repeatability ± 3 % FS
- Accuracy ± 2 % FS

Complete system including measurement and control electronics, measuring unit, flow indicator, reaction chamber and reagent dosing system.

Signal outputs

2 programmable signal outputs for measured values (freely scalable, linear).
Current loop: 4 – 20 mA
Communication interfaceRS485 interface (galvanically separated) with Modbus/JBUS RTU protocol.
Ethernet interface (TCP/IP) optional.

Relays

Alarm Relay s 1 summary alarm for ” analyzer failure”Maximum load:1A / 24 V
2 potential-free contacts for each channel programmable as limit switches for measuring values (high/low thresholds)
1 sample flow alarm for each channel
1 output for indication of the active sample stream for each channel.
1 output for maintenance indication.

For full details please view or download the Silica DATE SHEET

Silica in Process Water.
Silica in Surface Water.
Silica in Wastewater.
Silica in Effluents.

Analyzer

Seres OL Topaz Silica MR (0-20ppm) SOL–55.311.000
Seres OL Topaz Silica HR (0-50 ppm) SOL–55.311.100

Configuration

Dilution (HRx2) (Range extension 0-100 ppm for Topaz Silica HR) SOL–82.350.020
2-Channel Setup (MR/HR only, similar range) SOL-83.590.020
4-Channel Setup (MR/HR only, similar range) SOL-83.590.040
6-Channel Setup (MR/HR only, similar range) SOL-83.590.060
Ethernet Interface (TCP/IP) SOL-81.410.020

Option

1-Year Spare Part Package “Basis” (Analyzer + 1st channel) SOL-84.110.160
1-Year Spare Part Package “Multi-Channel” (add once if multi-channel configuration was selected) SOL-84.110.150
Reagent shelf inf SS316L SOL-89.610.010

Reagent specifications

Sulfuric acid 4N RXX158
Sodium Molybdate 29% RXX116G290
Oxalic Acid 10% RXX165
Reagent Consumption 1.1 l/month
Deionized Water (Dilution – Silica HRx2)
Consumption max 30l/month

Product Flyer Seres OL Topaz Analyzer Series

Datasheet Online Silica Analyzer Topaz

Which data/signal outputs does the Online Silica Analyzer offer?

2 programmable signal outputs for measured values (freely scalable, linear). Current loop:4 – 20 mA
Communication interface RS485 interface (galvanically separated) withModbus/JBUS RTU protocol.
Ethernet interface (TCP/IP) optional.

Relays

Alarm Relay s 1 summary alarm for ” analyzer failure”Maximum load:1A / 24 V
2 potential-free contacts for each channel programmable as limit switches for measuring values (high/low thresholds)
1 sample flow alarm for each channel
1 output for indication of the active sample stream for each channel.
1 output for maintenance indication.

CSA Certification?

All Swan Analyzers are CSA Certified at our premises before shipping.

How much water flow is required for the Silica Analyzer?

Min 30 l/h

Optimum 40 l/h

Description

Online Silica Analyzer

Complete monitoring system for the automatic, continuous measurement of silica in process water, surface water, wastewater and effluents.

For the continuous, colorimetric online determination of Silica.

Available in separate measuring ranges:
- Seres OL Topaz Silica MR: 0 to 20 ppm
- Seres OL Topaz Silica HR: 0 to 50 ppm
- Seres OL Topaz Silica HRx2: 0 to 100 ppm
Complete system including measurement and control electronics, measuring unit, flow indicator, reaction chamber and reagent dosing system.
Robust, high quality analyzer cabinet painted stainless steel, 316L.
Automatic, electrical zero measurement prior to each measurement cycle.
Automatic cell cleaning.
3 easily accessible peristaltic pump modules (4 for HRx2) for accurate, automatic dosing of chemical reagents.
2 analog and 6 digital outputs for alarms for process values and diagnostic alarms for each sample stream.
RS485 Modbus/JBUS RTU interface.
Large back-lit touchscreen color LCD display for the reading of all measured values and status information simultaneously.
Easy menu-guided operation in English or French.

The Serez OL Topaz series provides you with a high-quality industrial-grade Silica analyzer specific to your analysis requirement.

Specifications

Molybdate method; colorimetric determination of silica ions.

Reaction time 15 min.
Reaction time 17 min.

Topaz Silica MR 0-20 ppm
- Limit of Detection < 0.1 ppm
- Repeatability ± 2 % FS
- Accuracy ± 2 % FS

Topaz Silica HR 0-50 ppm
- Limit of Detection 0.5 ppm
- Repeatability ± 2 % FS
- Accuracy ± 2 % FS

Topaz Silica HRx2 0-100 ppm
- Limit of Detection 1 ppm
- Repeatability ± 3 % FS
- Accuracy ± 2 % FS

Complete system including measurement and control electronics, measuring unit, flow indicator, reaction chamber and reagent dosing system.

Signal outputs

2 programmable signal outputs for measured values (freely scalable, linear).
Current loop: 4 – 20 mA
Communication interfaceRS485 interface (galvanically separated) with Modbus/JBUS RTU protocol.
Ethernet interface (TCP/IP) optional.

Relays

Alarm Relay s 1 summary alarm for ” analyzer failure”Maximum load:1A / 24 V
2 potential-free contacts for each channel programmable as limit switches for measuring values (high/low thresholds)
1 sample flow alarm for each channel
1 output for indication of the active sample stream for each channel.
1 output for maintenance indication.

For full details please view or download the Silica DATE SHEET

Application

Silica in Process Water.
Silica in Surface Water.
Silica in Wastewater.
Silica in Effluents.

Options

Analyzer

Seres OL Topaz Silica MR (0-20ppm) SOL–55.311.000
Seres OL Topaz Silica HR (0-50 ppm) SOL–55.311.100

Configuration

Dilution (HRx2) (Range extension 0-100 ppm for Topaz Silica HR) SOL–82.350.020
2-Channel Setup (MR/HR only, similar range) SOL-83.590.020
4-Channel Setup (MR/HR only, similar range) SOL-83.590.040
6-Channel Setup (MR/HR only, similar range) SOL-83.590.060
Ethernet Interface (TCP/IP) SOL-81.410.020

Option

1-Year Spare Part Package “Basis” (Analyzer + 1st channel) SOL-84.110.160
1-Year Spare Part Package “Multi-Channel” (add once if multi-channel configuration was selected) SOL-84.110.150
Reagent shelf inf SS316L SOL-89.610.010

Reagent specifications

Sulfuric acid 4N RXX158
Sodium Molybdate 29% RXX116G290
Oxalic Acid 10% RXX165
Reagent Consumption 1.1 l/month
Deionized Water (Dilution – Silica HRx2)
Consumption max 30l/month

Downloads

Product Flyer Seres OL Topaz Analyzer Series

Datasheet Online Silica Analyzer Topaz

F.A.Q

Which data/signal outputs does the Online Silica Analyzer offer?

2 programmable signal outputs for measured values (freely scalable, linear). Current loop:4 – 20 mA
Communication interface RS485 interface (galvanically separated) withModbus/JBUS RTU protocol.
Ethernet interface (TCP/IP) optional.

Relays

Alarm Relay s 1 summary alarm for ” analyzer failure”Maximum load:1A / 24 V
2 potential-free contacts for each channel programmable as limit switches for measuring values (high/low thresholds)
1 sample flow alarm for each channel
1 output for indication of the active sample stream for each channel.
1 output for maintenance indication.

CSA Certification?

All Swan Analyzers are CSA Certified at our premises before shipping.

How much water flow is required for the Silica Analyzer?

Min 30 l/h

Optimum 40 l/h

Online Silica Analyzer

Seres Topaz Silica

The continuous measurement of silica in process water, surface water, wastewater and effluents.

Online Silica Analyzer

Analyzer

Configuration

Option

Reagent specifications

Online Silica Analyzer

Analyzer

Configuration

Option

Reagent specifications

1 877 291 5572

info@wjf.ca

Links