wjf-logo
1 877 291 5572    |    Contact Us    |    Search

Online Manganese Analyzer

Seres Topaz Manganese

The continuous measurement of Manganese Mn (II) in potable water, surface water, wastewater and effluents.

Call
Contact
Seres OL Analyzer Topaz Manganese Mn (II)

Online Manganese Analyzer

The SeresOL Manganese analyzer is a complete monitoring system for the automatic, continuous measurement of Manganese Mn (II) in potable water, surface water, wastewater, effluents and steam for power generation.

For the continuous, colorimetric online determination of Manganese Mn (II).

  • Available in separate measuring range configurations:
    • Seres OL Topaz Manganese LR:
      • 0-100 ppb or 0-200 ppb
    • Seres OL Topaz Manganese HR:
      • 0-1 ppm or 0-2 ppm
  • Complete system including measurement and control electronics, Manganese measuring unit, flow indicator, reaction chamber and reagent dosing system.
  • Robust, high quality analyzer cabinet painted stainless steel, 316L.
  • Automatic, electrical zero measurement prior to each measurement cycle.
  • Automatic cell cleaning.
  • 6 easily accessible peristaltic pump modules for accurate, automatic dosing of chemical reagents.
  • 2 analog and 7 digital outputs for alarms for process values and diagnostic alarms for each sample stream.
  • RS485 Modbus/JBUS RTU interface.
  • Large back-lit touchscreen color LCD display for the reading of all measured values and status information simultaneously.
  • Easy menu-guided operation in English or French.

The Serez OL Topaz series provides you with a high-quality industrial-grade Manganese analyzer specific to your analysis requirement.

About Manganese

Manganese is a common trace mineral found in various minerals, including iron, sulfates, sulfides, oxides, and chloride. Manganese is used in various industries to make steel, aluminum, disposable batteries, anti-knock additives, fertilizer, fungicides, glass production, pigments, fireworks, and paint. Manganese is required for human body’s needs.

Regulation
The EPA has established a health advisory for manganese with a lifetime limit of 0.3 mg/L manganese and has recommended a secondary drinking water limit of 0.05 mg/L. The FDA and many states have established a maximum manganese concentration in bottled and regulated potable drinking water of (less than) 0.05 mg/L. Therefore, manganese in drinking water can create both aesthetic problems and a health concern.

Manganese Mn (II) Analyzer
Seres OL with Manganese monitor configuration
Colorimetric method; Formation of a PAN-Manganese complex and dissolution of this complex with the Triton solution.
  • Reaction time 8-10 min.
  • Topaz Manganese LR 0-100 or 0-200 ppb
    • Limit of Detection 11 ppb
    • Repeatability < ± 2 % FS
    • Precision < ± 3 % FS
  • Topaz Manganese HR 0-1 or 0-2 ppm
    • Repeatability < ± 2 % FS
    • Precision < ± 3 % FS
Complete system including measurement and control electronics, measuring unit, flow indicator, reaction chamber and reagent dosing system. Signal outputs
  • 2 programmable signal outputs for measured values (freely scalable, linear).
  • Current loop: 4 – 20 mA
  • Communication interfaceRS485 interface (galvanically separated) with Modbus/JBUS RTU protocol.
  • Ethernet interface (TCP/IP) optional.
Relays
  • Alarm Relay s 1 summary alarm for ” analyzer failure”Maximum load:1A / 24 V
  • 2 potential-free contacts for each channel programmable as limit switches for measuring values (high/low thresholds)
  • 1 sample flow alarm for each channel
  • 1 output for indication of the active sample stream for each channel.
  • 1 output for maintenance indication.
For full details please view or download the Manganese DATE SHEET

Applications are wastewater, drinking water, steam & power generation, surface water.

  • Manganese in Drinking Water.
  • Manganese in Surface Water.
  • Manganese in Wastewater.
  • Manganese in Effluents.
  • Manganese in Steam & Power Generation.

Analyzer

  • Seres OL Topaz Manganese LR (0-100 ppb or 0-200 ppb) SOL–55.331.400
  • Seres OL Topaz Manganese HR (0-1 ppm or 0-2 ppm) SOL–55.331.500

Range Selection

  • 0-100 ppb or 0-200 ppb (requires Seres OL Topaz Manganese LR) Consult Sales
  • 0-1 ppm or 0-2 ppm (requires Seres OL Topaz Manganese HR) Consult Sales

Configuration

  • 2-Channel Setup (MR/HR only, similar range) SOL-83.590.020
  • 4-Channel Setup (MR/HR only, similar range) SOL-83.590.040
  • 6-Channel Setup (MR/HR only, similar range) SOL-83.590.060
  • Ethernet Interface (TCP/IP) SOL-81.410.020

Option

  • 1-Year Spare Part Package “Basis” (Analyzer + 1st channel) SOL-84.110.140
  • 1-Year Spare Part Package “Multi-Channel” (add once if multi-channel config. was selected) SOL-84.110.150
  • Reagent shelf inf SS316L SOL-89.610.010

Reagent specifications

  • Hydroxylamine Chlorhydrate 100g/L RXX221
    Reagent Consumption 3.2l/month

  • Triethanolamine 20% RXX222
  • Buffer Ammonicacal pH 9.2 RXX223
  • H2SO4 2N RXX159
  • Potassium cyanide RXX224
    Reagent Consumption (each) 3.2l/month

  • Pan + Triton X-100 RXX265
    Reagent Consumption HR 3.2l/month
pdf

Product Flyer Seres OL Topaz Analyzer Series

pdf
Datasheet Online Manganese Analyzer Topaz
  • 2 programmable signal outputs for measured values (freely scalable, linear). Current loop:4 – 20 mA
  • Communication interface RS485 interface (galvanically separated) withModbus/JBUS RTU protocol.
  • Ethernet interface (TCP/IP) optional.

Relays

  • Alarm Relay s 1 summary alarm for ” analyzer failure”Maximum load:1A / 24 V
  • 2 potential-free contacts for each channel programmable as limit switches for measuring values (high/low thresholds)
  • 1 sample flow alarm for each channel
  • 1 output for indication of the active sample stream for each channel.
  • 1 output for maintenance indication.

All Swan Analyzers are CSA Certified before shipping.

Min 30 l/h

Optimum 40 l/h

 

Description

Online Manganese Analyzer

The SeresOL Manganese analyzer is a complete monitoring system for the automatic, continuous measurement of Manganese Mn (II) in potable water, surface water, wastewater, effluents and steam for power generation.

For the continuous, colorimetric online determination of Manganese Mn (II).

  • Available in separate measuring range configurations:
    • Seres OL Topaz Manganese LR:
      • 0-100 ppb or 0-200 ppb
    • Seres OL Topaz Manganese HR:
      • 0-1 ppm or 0-2 ppm
  • Complete system including measurement and control electronics, Manganese measuring unit, flow indicator, reaction chamber and reagent dosing system.
  • Robust, high quality analyzer cabinet painted stainless steel, 316L.
  • Automatic, electrical zero measurement prior to each measurement cycle.
  • Automatic cell cleaning.
  • 6 easily accessible peristaltic pump modules for accurate, automatic dosing of chemical reagents.
  • 2 analog and 7 digital outputs for alarms for process values and diagnostic alarms for each sample stream.
  • RS485 Modbus/JBUS RTU interface.
  • Large back-lit touchscreen color LCD display for the reading of all measured values and status information simultaneously.
  • Easy menu-guided operation in English or French.

The Serez OL Topaz series provides you with a high-quality industrial-grade Manganese analyzer specific to your analysis requirement.

About Manganese

Manganese is a common trace mineral found in various minerals, including iron, sulfates, sulfides, oxides, and chloride. Manganese is used in various industries to make steel, aluminum, disposable batteries, anti-knock additives, fertilizer, fungicides, glass production, pigments, fireworks, and paint. Manganese is required for human body’s needs.

Regulation
The EPA has established a health advisory for manganese with a lifetime limit of 0.3 mg/L manganese and has recommended a secondary drinking water limit of 0.05 mg/L. The FDA and many states have established a maximum manganese concentration in bottled and regulated potable drinking water of (less than) 0.05 mg/L. Therefore, manganese in drinking water can create both aesthetic problems and a health concern.

Manganese Mn (II) Analyzer
Seres OL with Manganese monitor configuration
Specifications
Colorimetric method; Formation of a PAN-Manganese complex and dissolution of this complex with the Triton solution.
  • Reaction time 8-10 min.
  • Topaz Manganese LR 0-100 or 0-200 ppb
    • Limit of Detection 11 ppb
    • Repeatability < ± 2 % FS
    • Precision < ± 3 % FS
  • Topaz Manganese HR 0-1 or 0-2 ppm
    • Repeatability < ± 2 % FS
    • Precision < ± 3 % FS
Complete system including measurement and control electronics, measuring unit, flow indicator, reaction chamber and reagent dosing system. Signal outputs
  • 2 programmable signal outputs for measured values (freely scalable, linear).
  • Current loop: 4 – 20 mA
  • Communication interfaceRS485 interface (galvanically separated) with Modbus/JBUS RTU protocol.
  • Ethernet interface (TCP/IP) optional.
Relays
  • Alarm Relay s 1 summary alarm for ” analyzer failure”Maximum load:1A / 24 V
  • 2 potential-free contacts for each channel programmable as limit switches for measuring values (high/low thresholds)
  • 1 sample flow alarm for each channel
  • 1 output for indication of the active sample stream for each channel.
  • 1 output for maintenance indication.
For full details please view or download the Manganese DATE SHEET
Application

Applications are wastewater, drinking water, steam & power generation, surface water.

  • Manganese in Drinking Water.
  • Manganese in Surface Water.
  • Manganese in Wastewater.
  • Manganese in Effluents.
  • Manganese in Steam & Power Generation.
Options

Analyzer

  • Seres OL Topaz Manganese LR (0-100 ppb or 0-200 ppb) SOL–55.331.400
  • Seres OL Topaz Manganese HR (0-1 ppm or 0-2 ppm) SOL–55.331.500

Range Selection

  • 0-100 ppb or 0-200 ppb (requires Seres OL Topaz Manganese LR) Consult Sales
  • 0-1 ppm or 0-2 ppm (requires Seres OL Topaz Manganese HR) Consult Sales

Configuration

  • 2-Channel Setup (MR/HR only, similar range) SOL-83.590.020
  • 4-Channel Setup (MR/HR only, similar range) SOL-83.590.040
  • 6-Channel Setup (MR/HR only, similar range) SOL-83.590.060
  • Ethernet Interface (TCP/IP) SOL-81.410.020

Option

  • 1-Year Spare Part Package “Basis” (Analyzer + 1st channel) SOL-84.110.140
  • 1-Year Spare Part Package “Multi-Channel” (add once if multi-channel config. was selected) SOL-84.110.150
  • Reagent shelf inf SS316L SOL-89.610.010

Reagent specifications

  • Hydroxylamine Chlorhydrate 100g/L RXX221
    Reagent Consumption 3.2l/month

  • Triethanolamine 20% RXX222
  • Buffer Ammonicacal pH 9.2 RXX223
  • H2SO4 2N RXX159
  • Potassium cyanide RXX224
    Reagent Consumption (each) 3.2l/month

  • Pan + Triton X-100 RXX265
    Reagent Consumption HR 3.2l/month
Downloads
pdf

Product Flyer Seres OL Topaz Analyzer Series

pdf
Datasheet Online Manganese Analyzer Topaz
F.A.Q
  • 2 programmable signal outputs for measured values (freely scalable, linear). Current loop:4 – 20 mA
  • Communication interface RS485 interface (galvanically separated) withModbus/JBUS RTU protocol.
  • Ethernet interface (TCP/IP) optional.

Relays

  • Alarm Relay s 1 summary alarm for ” analyzer failure”Maximum load:1A / 24 V
  • 2 potential-free contacts for each channel programmable as limit switches for measuring values (high/low thresholds)
  • 1 sample flow alarm for each channel
  • 1 output for indication of the active sample stream for each channel.
  • 1 output for maintenance indication.

All Swan Analyzers are CSA Certified before shipping.

Min 30 l/h

Optimum 40 l/h

 
Swan Canada Logo
Seres OL
Hanna Canada
FMI_carousel
Kobold Instrumentation
i-acd-icon.gif
ATI Gas Monitoring Logo
Burkert Canada
i-bwcontrols-icon.gif
Delta Instrument Canada
HF Scientific Canada
Intempco Canada
Multisensor Systems Canada
i-partech-icon.gif
Van London Canada
Walchem Canada
wjf-logo

1 877 291 5572

info@wjf.ca

Municipal Drinking Water
Municipal Wastewater
Industrial Wastewater
Power Generation
Pulp & Paper
Chemical Manufacturing
Oil, Gas & Fracturing
Beverage Manufacturing
Food Production
Pharmaceutical & Medical
Laboratory

Links

About WJF
Contact WJF
Privacy Policy
Terms & Conditions
Site Map

WJF Instrumentation Ltd.
#5 3610 – 29th Street N.E.
Calgary, Alberta
Canada
T1Y 5Z7

Calgary Head Office
Toll-Free: (877)291-5572
Standard: (403)291-5570

Ontario & Maritimes Sales:
(905)809-6918