Home > Chemical Feed Pumps > FMI OEM Pumps > FMI OEM Dispensing Pump
The STH Low Flow Miniature OEM Dispensing Pump is ideal for OEM Medical, Analytical & Instrumentation Applications.
The drive can be configured at the factory to deliver the most efficient performance necessary to control the pump over a wide speed range. Ideal for OEM Metering & Dispensing Applications.
Valveless Pump, Stepper Motor Drive & Programmable Electronics in an Integral Compact Design.
Our Engineering Team incorporates over 59 years of OEM design experience to meet specific customer & application requirements.
With the knowledge and the necessary tools, our engineers have developed the most precise and reliable OEM Dispensing Pump available.
| Spec | Value |
|---|---|
| Dimensions: | 6.31″ x 3.81″ x 3.25″ (160.3 x 96.8 x 82.6 mm) |
| Shipping Weight: | approx 2 lbs. (0.9 kg) |
| Flow Rate: | 25 μL/min to 240 mL/min |
| Pump Pressure Rating: | 40 psig |
| Motor Speed: | 10 – 2000 RPM |
| Input Voltage: | Pump Motor Voltage: 9-36 VDC Logic Voltage: 7-38 VDC |
| Rated Current: | 3.0A Power Supply @ 24VDC (recommended) |
| Motor Frame: | NEMA size 17 |
| Operating Temperature: | 32°F – 104°F (0°C – 40°C) |
| GUI – Intelligent Pump Configuration Tool | Communication via RS232 or CANopen protocol. Adjustments can be made to custom fit the pump control settings. |
Repeatability, Precision and Accuracy.
Once the pump is set, it will perform accurately over the lifetime of the pump.
As with all FMI pump the head is viscosity independent. If you can get the fluid to the inlet, the pump will be able to deliver it in a very precise manner.
Because it is a stepper motor a stepper controller will be required. We can supply a controller, or use any controller you currently have at your disposal.
Yes. Please call for options.
There are many applications but it is specifically used in many Medical and Pharmaceutical applications.
This pump is currently being used in a large amount of medical instruments where FDA certification has been achieved.
We recently conducted tests and found that with this product using high purity water we were able to reach 82 million cycles with no loss of accuracy.
The Repeatability, Precision and Accuracy is superior to any other similar product currently on the market.
The STH Low Flow Miniature OEM Dispensing Pump is ideal for OEM Medical, Analytical & Instrumentation Applications.
The drive can be configured at the factory to deliver the most efficient performance necessary to control the pump over a wide speed range. Ideal for OEM Metering & Dispensing Applications.
Valveless Pump, Stepper Motor Drive & Programmable Electronics in an Integral Compact Design.
Our Engineering Team incorporates over 59 years of OEM design experience to meet specific customer & application requirements.
With the knowledge and the necessary tools, our engineers have developed the most precise and reliable OEM Dispensing Pump available.
| Spec | Value |
|---|---|
| Dimensions: | 6.31″ x 3.81″ x 3.25″ (160.3 x 96.8 x 82.6 mm) |
| Shipping Weight: | approx 2 lbs. (0.9 kg) |
| Flow Rate: | 25 μL/min to 240 mL/min |
| Pump Pressure Rating: | 40 psig |
| Motor Speed: | 10 – 2000 RPM |
| Input Voltage: | Pump Motor Voltage: 9-36 VDC Logic Voltage: 7-38 VDC |
| Rated Current: | 3.0A Power Supply @ 24VDC (recommended) |
| Motor Frame: | NEMA size 17 |
| Operating Temperature: | 32°F – 104°F (0°C – 40°C) |
| GUI – Intelligent Pump Configuration Tool | Communication via RS232 or CANopen protocol. Adjustments can be made to custom fit the pump control settings. |
Repeatability, Precision and Accuracy.
Once the pump is set, it will perform accurately over the lifetime of the pump.
As with all FMI pump the head is viscosity independent. If you can get the fluid to the inlet, the pump will be able to deliver it in a very precise manner.
Because it is a stepper motor a stepper controller will be required. We can supply a controller, or use any controller you currently have at your disposal.
Yes. Please call for options.
There are many applications but it is specifically used in many Medical and Pharmaceutical applications.
This pump is currently being used in a large amount of medical instruments where FDA certification has been achieved.
We recently conducted tests and found that with this product using high purity water we were able to reach 82 million cycles with no loss of accuracy.
The Repeatability, Precision and Accuracy is superior to any other similar product currently on the market.
WJF Instrumentation Ltd.
#5 3610 – 29th Street N.E.
Calgary, Alberta
Canada
T1Y 5Z7
Calgary Head Office
Toll-Free: (877)291-5572
Standard: (403)291-5570
Ontario & Maritimes Sales:
(905)809-6918
