Trace Levels of Dissolved Oxygen

High precision monitor with three electrode Oxytrace G sensor for the continuous measurement of trace levels of dissolved oxygen in high purity water.

• Range: 0-20 ppm or 0-200 % saturation (at 25°C).
• Automatic air pressure and temperature compensation.
• Short rinse-down time due to integrated guard.
• Factory tested, ready for use.

Continuous amperometric measurement of  trace levels of dissolved Oxygen in high purity water.

• Integrated air pressure and temperature compensation for simple calibration using ambient air.
• Long-term stable measuring system with robust electrode for minimized operating cost.
• Easy to handle membrane and electrolyte exchange, sensor cap for up to 24 months of operation.
  
  

Swansensor Oxytrace G with three electrode set-up (cathode [gold], anode [silver] and guard [silver]) with integrated NT5k temperature sensor.

Complete system mounted on stainless steel mounting panel.

Transmitter in aluminum housing (IP 66) with 2 signal outputs for measuring value or for continuous control, 2 relays as limit switch or controller or timer, 1 alarm relay as summary alarm contact, 1 input for potential-free contact.

Flow cell QV-Flow PMMA OTG made of acrylic glass with needle valve and digital sample flow meter on mounting angle made of stainless steel.