Low Level Turbidity Monitor for Pure Water

AMI Turbitrak

Nephelometric system for the automatic and continuous measurement of low level turbidity in pure water with up to 10 bar sample pressure.

Low level Turbidity Monitor for pure water ISO 7027 compliant determination of turbidity under process pressure conditions Sample intake up to 10 bar; no pressure reduction necessary Minimized maintenance because of wiper-free operation Fast and easy to use verification with primary and secondary standard.

Measurement range: 0.000 to 100.0 FNU ± 0.001 FNU or 1% of reading
Fast response: 90% of change within 15 seconds
Easy user interface with full text menu.
Pressure resistant system up to 10 bar.
Complete panel mounted system; tested, calibrated and ready for operation.

Turbidimeter with flow controller. Measurement range: 0.000 – 100.0 FNU/NTU with automatic range switching. Precision: 0.001 FNU/NTU or 1% of reading with automatic purging of optical chamber in programmable intervals.

High precision nephelometer complying with ISO 7027 (EN 27027, DIN 38404)
Measurement range: 0.000 – 100.0 FNU/NTU Automatic range switching.
Precision: ± 0.001 FNU/NTU or 1% of reading.
Response time: typically T90 < 15 sec (after sample entry at 10 l/h)
Manual verification with high precision secondary standards.
Automatic purging of optical measurement chamber in programmable intervals.
Pressure tight sample system up to 10 bar avoids outgassing of sample.
Transmitter, turbidity sensor, flow cell, flow controller and sensor mounted on panel for immediate use.

Specifications:

Monitor AMI Turbitrack – Low Level Turbidity Monitor for Pure Water
Measuring range	Measurement range: 0.000 – 100.0 FNU/NTU with automatic range switching. Precision: 0.001 FNU/NTU or 1% of reading with automatic purging of optical chamber in programmable intervals.
Transmitter Specifications
Power Supply	AC Version: 100-240 VAC (±10%), 50/60Hz DC Verson: 10-36 VDC
Power consumption	max. 35 VA
Sample conditions
Water consumption	min. 5 – 20 l/h
Water inlet pressure	1 – 10 bar
Sample temperature	1 – 40 °C
Panel
Dimension	280 x 850 x 200 mm
Material	PVC
Weight	7.6 kg

Detailed Specification can be found on Page 2 of this Data Sheet.

Municipal.
Pool & Sanitary.
Potable Water.
Power and Steam Applications.
Pure Water.

Consumables

A-85.880.110 Humidity absorber, 40ml

Accessories

A-81.420.020 AMI Option; Profibus- / Modbus Interface
A-81.420.042 AMI Option; USB Interface
A-81.420.060 AMI Option; HART Interface
A-85.151.010 Verification kit “LOW”
A-85.151.020 Verification kit “ZERO”
A-86.180.010 Sample tubing, LD-PE, 6×4 mm, 3m
A-88.224.220 Communication cable, AMI to PC, 2 m

Spare parts

A-86.190.090 Tubing kit for AMI Turbitrack
A-89.811.060 Set of fuses for AMI

Low Level Turbidity Monitor for Pure Water .pdf

What is a Low Level Turbidity Monitor?

A Low Level Turbidity Monitor Analyzer is an essential device for accurately measuring the Low levels of turbidity in pure water. It is designed to provide reliable and accurate measurements of turbidity in pure water.

Additionally, the analyzer can be easily operated through its built-in user interface.

Which data/signal outputs?

2 Relay outputs Two potential-free contacts program-able as limit switches for measuring values, controllers or timer with automatic hold function. Rated load: 1A / 250 VAC
2 Signal outputs (3rd as option)Two programmable signal outputs for measured values (freely scalable, linear or bi-linear) or as continuous control out-put (control parameters programmable) as current source. 3rd signal output selectable as current source or current sink. Current loop: 0/4 – 20 mA Maximum burden: 510 Ω
Optional Profibus- / Modbus Interface
Optional HART Interface
Optional USB Interface
Optional Third 0/4 – 20 mA Output

CSA Certification?

All Swan Analyzers are CSA Certified before shipping.

How much water flow is required?

5 – 20 l/h

Description

Measurement range: 0.000 to 100.0 FNU ± 0.001 FNU or 1% of reading
Fast response: 90% of change within 15 seconds
Easy user interface with full text menu.
Pressure resistant system up to 10 bar.
Complete panel mounted system; tested, calibrated and ready for operation.

High precision nephelometer complying with ISO 7027 (EN 27027, DIN 38404)
Measurement range: 0.000 – 100.0 FNU/NTU Automatic range switching.
Precision: ± 0.001 FNU/NTU or 1% of reading.
Response time: typically T90 < 15 sec (after sample entry at 10 l/h)
Manual verification with high precision secondary standards.
Automatic purging of optical measurement chamber in programmable intervals.
Pressure tight sample system up to 10 bar avoids outgassing of sample.
Transmitter, turbidity sensor, flow cell, flow controller and sensor mounted on panel for immediate use.

Specifications

Specifications:

Monitor AMI Turbitrack – Low Level Turbidity Monitor for Pure Water
Measuring range	Measurement range: 0.000 – 100.0 FNU/NTU with automatic range switching. Precision: 0.001 FNU/NTU or 1% of reading with automatic purging of optical chamber in programmable intervals.
Transmitter Specifications
Power Supply	AC Version: 100-240 VAC (±10%), 50/60Hz DC Verson: 10-36 VDC
Power consumption	max. 35 VA
Sample conditions
Water consumption	min. 5 – 20 l/h
Water inlet pressure	1 – 10 bar
Sample temperature	1 – 40 °C
Panel
Dimension	280 x 850 x 200 mm
Material	PVC
Weight	7.6 kg

Detailed Specification can be found on Page 2 of this Data Sheet.

Application

Municipal.
Pool & Sanitary.
Potable Water.
Power and Steam Applications.
Pure Water.

Options