Industrial Temperature Sensors

Programmable Temperature Sensor Switch & Transmitter

The Series PTS02 is a Programmable Industrial Temperature Sensor Switch & Transmitter offering an analog 4-20mA output, transistor or relay switch output. Optional RTD output. Utilizing Intempco’s patented MIST technology. Designed for optimum accuracy and performance. The main areas of applications for this transducer are oil and gas as well as other hazardous areas.

• CSA Class I Div. 1 Explosion Proof.
• Available 4-20mA or voltage programmable signal output.
• Available fully programmable switch output; relay or transistor.
• Field re-programmable with optional PC interface module & software.
• Security password and tracking protection for re-programming and re-calibration.
• Utilizes self-calibration feature for accurate and stable performance.
• Utilizes Pt-100 Ohm RTD Class A element for temperature sensing.
• Excellent long term properties.
• Standard SS316/SS316L construction.
• Type 4X, IP66/IP67 rated environmental protection.
• Easy installation with various mounting configurations.

Shipped factory calibrated to customer specified temperature ranges. The unique feature of the PTS02 is that it is re-programmable. Process temperature or alarm change? No problem! Simply use PTS02-PKIT interface module and re-range your PTS without the need to re-calibrate and without the loss of accuracy. PTS02 is much more accurate than an RTD and a separate indicator/transmitter or switch. When the PTS02 is re-scaled to a different temperature range, the calibrated default values are not lost. This transducer can be re-calibrated by performing one-point or two-point calibration using known temperature standards. This is where thePTS02 leaves the competition behind.

Programmable Temperature Sensor

Indicating temperature range, current output, switch set point, switching hysterises, switch logic, damping and other features are all programmable. The PTS02 wetted parts, as well as the housing, are fabricated from 316 stainless construction. Other materials, various probe diameters, fitting sizes and thermowell types are available. For electrical connection, a 1/2” NPT conduit with lead wires is standard. The sensing element used is Pt-100 Ohm RTD Class A. PTS02 can be made available with an additional 3-wire RTD output. This feature allows a single process connection to be used for indication of temperature and for remote indication, recording, or controlling. Each PTS02 has the part number, range and serial number marked on the transmitter housing. If you require an accurate, stable and dependable temperature transducer, look no further. Model PTS02 is your solution. This product is protected under US patent 7,223,014 and CDN patent2,561,570

Industrial Applications

• Oil and Gas
• Refineries
• Chemical and Petrochemical Plants
• Paper Mills
• Hydraulics
• Mining