Low-level (parts per billion) dissolved oxygen sensors are automatically verified with SWAN Analytical Instrument’s model AMI Oxytrace QED dissolved oxygen analyzer.
This AMI Oxytrace QED analyzer incorporates a Faraday type low-level oxygen generator into the sample flowcell of the instrument.
By default the instrument is programmed to perform an automatic ppb-level sensor verification every 3 hours to check the probe response time and amplitude.
The AMI Oxytrace QED system is stainless steel panel-mounted with transmitter, flowcell, probe and generator all combined for simple installation and operation.
The Clark type probe with guard (for fast sensor response) is reliable and accurate.
The system includes built-in flow control valve, sample flowmeter and membrane and electrolyte monitoring to ensure sample and probe integrity.
Calibration (in air) is simple and no zero calibration is required. No special gases such as nitrogen are required for calibration.
Oxygen/corrosion prevention in boilers can be tricky but SWAN’s AMI Oxytrace QED self-verification system provides peace of mind with unmatched analyzer integrity.
Typical applications include boiler blowdown, economizer inlet and condensate pump discharge water.
The analyzer is capable of levels from 0.010 up to 200% saturated and thus is useful as well for oxygenated systems.
Complete system mounted on stainless steel mounting panel.
Transmitter in aluminum housing (IP 66) with 2 signal outputs for measuring value or for continuous control, 2 relays as limit switch or controller or timer, 1 alarm relay as summary alarm contact, 1 input for potential-free contact.
Flow cell QV-Flow PMMA OTG QED made of acrylic glass with needle valve, faraday electrode and digital sample flow meter on mounting angle made of stainless steel.
Faraday calibrator for the automatic verification of the instrument.
Measuring range with Swansensor OXYTRACE G (at 25 °C):
Process connections:
For further information see data sheet.
Online Analyzer for the Continuous Measurement of Dissolved Oxygen (DO) in High Purity Water with Integrated Auto-Verification
Power Generation
Used for high purity water monitoring within power cycle chemistry systems.
Water Treatment
Monitoring high purity water treatment systems for DO.
Consumables
Accessories
Spare parts
Datasheet AMI Oxytrace QED.pdf (407kB)
Flyer AMI Oxytrace QED.pdf (80kB)
All Swan Analyzers are CSA Cirtified at our premises before shipping.
Low-level (parts per billion) dissolved oxygen sensors are automatically verified with SWAN Analytical Instrument’s model AMI Oxytrace QED dissolved oxygen analyzer.
This AMI Oxytrace QED analyzer incorporates a Faraday type low-level oxygen generator into the sample flowcell of the instrument.
By default the instrument is programmed to perform an automatic ppb-level sensor verification every 3 hours to check the probe response time and amplitude.
The AMI Oxytrace QED system is stainless steel panel-mounted with transmitter, flowcell, probe and generator all combined for simple installation and operation.
The Clark type probe with guard (for fast sensor response) is reliable and accurate.
The system includes built-in flow control valve, sample flowmeter and membrane and electrolyte monitoring to ensure sample and probe integrity.
Calibration (in air) is simple and no zero calibration is required. No special gases such as nitrogen are required for calibration.
Oxygen/corrosion prevention in boilers can be tricky but SWAN’s AMI Oxytrace QED self-verification system provides peace of mind with unmatched analyzer integrity.
Typical applications include boiler blowdown, economizer inlet and condensate pump discharge water.
The analyzer is capable of levels from 0.010 up to 200% saturated and thus is useful as well for oxygenated systems.
Complete system mounted on stainless steel mounting panel.
Transmitter in aluminum housing (IP 66) with 2 signal outputs for measuring value or for continuous control, 2 relays as limit switch or controller or timer, 1 alarm relay as summary alarm contact, 1 input for potential-free contact.
Flow cell QV-Flow PMMA OTG QED made of acrylic glass with needle valve, faraday electrode and digital sample flow meter on mounting angle made of stainless steel.
Faraday calibrator for the automatic verification of the instrument.
Measuring range with Swansensor OXYTRACE G (at 25 °C):
Process connections:
For further information see data sheet.
Online Analyzer for the Continuous Measurement of Dissolved Oxygen (DO) in High Purity Water with Integrated Auto-Verification
Power Generation
Used for high purity water monitoring within power cycle chemistry systems.
Water Treatment
Monitoring high purity water treatment systems for DO.
Consumables
Accessories
Spare parts
Datasheet AMI Oxytrace QED.pdf (407kB)
Flyer AMI Oxytrace QED.pdf (80kB)
All Swan Analyzers are CSA Cirtified at our premises before shipping.
WJF Instrumentation Ltd.
#5 3610 – 29th Street N.E.
Calgary, Alberta
Canada
T1Y 5Z7
Calgary Head Office
Toll-Free: (877)291-5572
Standard: (403)291-5570
Ontario & Maritimes Sales:
(905)809-6918
