Type 8188
Guided Radar Level measurement interchangeable cable, rod, or coax probes, continuous measurement in various industrial liquid applications.
Municipal Waste Water
Guided Radar Level measurement interchangeable cable, rod, or coax probes, continuous measurement in various industrial liquid applications.
Radar Level Type 8137 is a non-contact radar level meter designed for continuous level measurement. This unit is available in two variants:
Ultrasonic Level for Continuous Non-Contact Measurement in both open and closed vessels. Suitable for liquids and solids, in all industries.
2-way Globe Control Valve fulfills tough criteria for process environments. Unrivaled cycle life and sealing integrity.
2-way Angle Seat Control Valve meets the stringent demands of process environments. Exceptional durability, unrivaled cycle life.
Diaphragm valve externally controlled Type 2103 consists of a SS pneumatically operated piston actuator, a diaphragm and a 2-way valve body.
Angle seat valve (2100). Specifically optimized for decentralized process automation, meeting the stringent demands of process environments.
Angle seat valve (2100). Specifically optimized for decentralized process automation, meeting the stringent demands of process environments.
Angle seat valve (2100). Specifically optimized for decentralized process automation, meeting the stringent demands of process environments.
Angle seat valve (2100). Specifically optimized for decentralized process automation, meeting the stringent demands of process environments.
Type 2000 Angle seat valve. Externally piloted, operated with a single or double-acting piston actuator. Available in two different materials.
Walchem Water Treatment Controller with powerful built-in algorithms for control of metering pumps and valves from multiple sensor inputs.
pH and Redox (ORP) potential in potable water and effluents. Dual channel monitor for continuous measurement.
Combustible Gas Detector system eliminates the need for frequent response checks with ATi’s pioneering AutoTest. This transmitter performs an automatic test using self-generated gas on the sensing element every 24 hours with the world’s only self-testing AutoTest gas module for…
The revolutionary SWAN AMI Turbiwell LED online turbidity analyzer boasts unique features not found in other turbidity analyzers. The non-contact, EPA approved white light LED optical system is virtually maintenance-free. The system requires no calibration, uses no spare parts or…
The Hanna Turbidity and Chlorine HI93414 is a high accuracy Handheld analyzer. Combining nephelometer and photometer to measure key parameters in drinking water. calibration and performance verification is ensured with the supplied AMCO-AEPA-1 primary turbidity standards and NIST traceable secondary…
Chlorine monitoring system, provides monitoring for several species of disinfectants with one instrument. The instrument can monitor for free chlorine and total chlorine, and can also calculate monochloramine, combined chlorine and disinfection byproducts (THM, HAA, etc.) as a group. Supplied…
Detection of combustible levels of methane or other hydrocarbons % LEL. It may also be used for monitoring CO2 levels, either in ppm or percent levels. D12Ex-IR infrared gas transmitters provide analog signals for remote interface and optional relays for…
Complete monitoring system for the automatic, continuous measurement of ortho- phosphate in boiler water, district heating, cooling water and waste water. Measuring range: 0.1 to 50 ppm (mg/l) as PO4 or 0.1 to 16 ppm (mg/l) as P-PO4 Based…
The OxyTechw² GAL Sensor has been designed to provide highly reliable Dissolved Oxygen measurements. The sensor employs the traditional galvanic principle. The rugged 100 micron, HDPE membrane has been selected to provide exceptional resistance to damage. This, combined with Oxyguard’s…
Direct–acting Type 6014 valve for individual or manifold mounting with push–over coil, for use with a variety media depending on the materials of construction. Delivered in various body materials and also suitable for use in technical vacuum Direct-acting, compact valve.…
Servo-assisted solenoid valve with diaphragm, normally closed function. Hermetic isolation of fluid from the actuator. A minimum differential pressure of 7 PSI is required to fully open the valve. Valves can be mounted or removed radially for a space-saving installation.…
The Type 5282 is a pilot-controlled normally closed solenoid valve with a servo-diaphragm, media separated, for universal use with liquid and gaseous media corresponding to the material resistance.As standard, the 3-way pivoted armature pilot drive has an emergency manual operation.…
The Type 6213 is a 2/2–way normally closed solenoid valve with a forced coupled diaphragm system. It switches from 1.5 PSI and can be used universally for fluids. For complete opening, a differential pressure of at least 1.5 PSI is…
The TurbiTechw² HR Sensor has been specifically designed for use in wastewater treatment systems where high levels of suspended solids are desirable in the aeration phase. Membrane Bio Reactors (MBR) typically run with MLSS values in the region of 8,000…
The TurbiTechw² LA Sensor has been designed for use in aeration systems monitoring suspended solids also known as mixed liquor suspended solids or activated sludge where solids are typically in the range of 1,500 to 3,500 mg/l. The sensor can…
The ASLD2200 is a fully automatic sludge blanket level detector designed for the water and waste water industry. It utilises a servo-driven sensor which continually tracks the settled interface with the sensor at the very top of the interface zone.…
The SludgeWatch Ultra utilizes the industry accepted look down ultrasonic or ‘sonar’ method of detecting and tracking the interface between sludge and water in water, wastewater and industrial effluent settlement tanks and clarifiers. The cleaning wiper operates automatically to remove…
The SludgeWatch 8200w² Monitor provides a reliable method of detecting the sludge blanket level in clarifiers and settlement tanks, or increasing levels of suspended solids or sludge density in large range of processes. Control of the sludge blanket level is…
The SludgeWatch 715 provides a simple, low cost method of spot checking the sludge blanket level in a wide variety of settlement tanks. The cable reel design removes the need for any additional carrying bag. The sludge blanket is detected…
WJF Instrumentation Ltd.
#5 3610 – 29th Street N.E.
Calgary, Alberta
Canada
T1Y 5Z7
Calgary Head Office
Toll-Free: (877)291-5572
Standard: (403)291-5570
Ontario & Maritimes Sales:
(905)809-6918