Combustible Gas Detector system eliminates the need for frequent response checks with ATi’s pioneering AutoTest. This transmitter performs an automatic test using self-generated gas on the sensing element every 24 hours with the world’s only self-testing AutoTest gas module for…
The Hanna Turbidity and Chlorine HI93414 is a high accuracy Handheld analyzer. Combining nephelometer and photometer to measure key parameters in drinking water. calibration and performance verification is ensured with the supplied AMCO-AEPA-1 primary turbidity standards and NIST traceable secondary…
Detection of combustible levels of methane or other hydrocarbons % LEL. It may also be used for monitoring CO2 levels, either in ppm or percent levels. D12Ex-IR infrared gas transmitters provide analog signals for remote interface and optional relays for…
Complete monitoring system for the automatic, continuous measurement of ortho- phosphate in boiler water, district heating, cooling water and waste water. Measuring range: 0.1 to 50 ppm (mg/l) as PO4 or 0.1 to 16 ppm (mg/l) as P-PO4 Based…
Direct–acting Type 6014 valve for individual or manifold mounting with push–over coil, for use with a variety media depending on the materials of construction. Delivered in various body materials and also suitable for use in technical vacuum Direct-acting, compact valve.…
Servo-assisted solenoid valve with diaphragm, normally closed function. Hermetic isolation of fluid from the actuator. A minimum differential pressure of 7 PSI is required to fully open the valve. Valves can be mounted or removed radially for a space-saving installation.…
The Type 5282 is a pilot-controlled normally closed solenoid valve with a servo-diaphragm, media separated, for universal use with liquid and gaseous media corresponding to the material resistance.As standard, the 3-way pivoted armature pilot drive has an emergency manual operation.…
The Type 6213 is a 2/2–way normally closed solenoid valve with a forced coupled diaphragm system. It switches from 1.5 PSI and can be used universally for fluids. For complete opening, a differential pressure of at least 1.5 PSI is…
UVT Monitor – UV Transmittance at 254 nm SWAN AMI SAC 254 UVT Monitor for the continuous measurement of UV transmittance absorption at 254 nm for organic carbon trending in potable and waste water effluent. Call Contact Description Specification Application…
Online Phosphate Analyzer AMI Phosphate-II AC Online Phosphate Analyzer using the colorimetric process for the automatic, continuous measurement of phosphate. Call Contact Description Specification Application Options Downloads F.A.Q The Online Phosphate Analyzer from SWAN Analytical Instruments’. The AMI Phosphate-II Measuring…
Online Chemical Oxygen Demand (COD) Analyzer Seres Topaz COD Complete monitoring system for the automatic, continuous measurement of chemical oxygen demand (COD) in surface water. Call Contact Description Specification Application Options Downloads F.A.Q Online Chemical Oxygen Demand (COD) Analyzer Complete…
Wet H2S gas monitor is a new type of gas sensor technology that allows continuous monitoring of hydrogen sulfide in both inlet and discharge air, where condensing humidity conditions are normal. Measurements may be either at the inlet to scrubber…
ATi’s E12-15 IR Infrared High Level Ammonia Gas Detector is a rugged, reliable, microprocessor-based, intelligent gas detector. The E12-15 IR can be used to monitor from PPM levels to explosive levels of ammonia gas. The E12-15 IR is ideally suited…
A14/A11 Modular Gas Detector is a flexible component system providing a variety of options to meet individual gas detection and alarm requirements. From chemical and petrochemical plants to food processors, this economical and low maintenance system can be applied to…
Locating the source of gas leaks can be a challenge, especially in plant areas with multiple potential leak sources. Ammonia refrigeration piping, ozone generator skids, and hazardous gas piping systems are just a few of the applications where identifying exact…
B12 Wet Gas System was developed to meet the need for reliable measurements in wet scrubber outlets for other gas streams that might be saturated with water vapor. Systems have been developed for monitoring strong oxidants (chlorine, bromine, chlorine dioxide,…
ATI’s Series F12/D provides a high level of confidence that your system is functional at all times. Our Auto-Test feature provides an actual gas “bump test” every 24 hours, verifying system integrity. Not an electronic test of some kind but…
Our UniSens universal 2-wire gas transmitter handles 28 different gases, providing the most economical and flexible gas measurement system available today. Combining universal electronics, bench calibration capability, automatic sensor verification, fault detection and alarming, and superior sensor technology, UniSens is…
The MS1800 is a VOC and Hydrocarbon Gas Concentration Analyzer. It is designed to monitor VOC gases in industrial processes and applications as well as in environmental moni- toring applications. The instrument senses gases or volatiles providing a measurement system…
The high performance Coriolis mass flow meter distinguishes itself from the competition because we are able to achieve higher flow rates and mass flow measurements in larger line sizes than other mass flow meter providers. With the TMU, we have…
The EPS offers several advantages over similar models. It is designed specifically for reliability and longevity in harsh environments, comes in a wide variety of lining materials to maximize compatibility with the process media, and offers a large selection of…
The HI98703 Hanna Portable Turbidity Metre is specially designed for water quality measurements, providing reliable and accurate readings, especially in the low turbidity range. State-of-the-art optical system guarantees accurate results, assures long term stability, and minimizes stray light and color…
HI97742 is an advanced portable photometer for the measurement of low levels of iron and manganese in water. This meter offers a superior optical system that utilizes a reference detector and narrow band interference filters for extremely fast and repeatable…
The HI98199 is a rugged, portable multiparameter meter with a single digital probe input. The digital probe input allows the connection of either a pH, conductivity or dissolved oxygen probe (creating a dissolved oxygen meter). Between the three probes and…
The Hanna edge® Multiparameter Metre groundbreaking design is the culmination of Hanna’s vision, design capabilities, integrated production and world class R&D. The edge meter is only 0.5” thick yet rich in features to accommodate the needs of a vast amount…
The HI9125 is a rugged, portable pH and mV meter providing laboratory precision and accuracy in harsh environmental or industrial conditions. This meter can use an optional ORP (oxidation reduction potential) electrodes to display results in the mV range. The…
The Hanna Portable pH Metre (HI991001) is a compact, waterproof, hand-held pH/temperature metre. Supplied with a rugged carrying case and a unique titanium body pH electrode that has a built-in temperature sensor. The pH metre features a large LCD display…
Methane Calibration Gas – Methane Cal Gas Methane Calibration Gases The best pricing in the industry with fast delivery Call Contact Home > Calibration Gas > Methane Calibration Gas – Methane Cal Gas Description Specification Application Accessories Downloads The Best…
Online Manganese Analyzer Seres Topaz Manganese The continuous measurement of Manganese Mn (II) in potable water, surface water, wastewater and effluents. Call Contact Description Specification Application Options Downloads F.A.Q Online Manganese Analyzer Complete monitoring system for the automatic, continuous measurement…
Online Silica Analyzer Seres Topaz Silica The continuous measurement of silica in process water, surface water, wastewater and effluents. Call Contact Description Specification Application Options Downloads F.A.Q Online Silica Analyzer Complete monitoring system for the automatic, continuous measurement of silica…
WJF Instrumentation Ltd.
#5 3610 – 29th Street N.E.
Calgary, Alberta
Canada
T1Y 5Z7
Calgary Head Office
Toll-Free: (877)291-5572
Standard: (403)291-5570
Ontario & Maritimes Sales:
(905)809-6918
