wjf-logo
1 877 291 5572    |    Contact Us    |    Search

Hydrogen Fluoride Gas Detector List

A Hydrogen Fluoride (HF) gas detector is a device used to detect the presence of HF gas in the air. Because HF gas poses a serious risk to both human health and the environment, it is essential that industrial and commercial facilities that handle or store it have safety equipment.

A transmitter housing and sensor typically make up an HF gas detector. The sensor, which is intended to identify and measure any HF present in the air, is designed to detect and measure air that has been drawn from the environment. When dangerous amounts of HF are found in the vicinity, the sensor sends a signal to an alarm system that can notify staff.

  • All Products
  • Activated Sludge
  • Aluminum
  • Ammonia Gas Detector
  • Ammonium
  • Bromine
  • Calibration Gas
  • Cation Conductivity
  • Chemical Feed Pumps
  • Chemical Oxygen Demand
  • Chemical Pumps (Hazardous Duty)
  • Chloride
  • Chlorine (Combined)
  • Chlorine (Free)
  • Chlorine (Residual)
  • Chlorine (Total)
  • Chlorine Dioxide
  • Colour of Water
  • Combustible Gas Detector
  • Conductivity
  • Dewpoint
  • Dewpoint (Hazardous Location)
  • Dichloramine
  • Dissolved Hydrogen
  • Dissolved Iron
  • Dissolved Oxygen
  • Dissolved Ozone
  • DPD
  • DPD and Reagents
  • Explosion Proof Pressure Gauges
  • Explosion Proof Temperature Sensors
  • Float Level Switches
  • Flow Meter (Coriolis)
  • Flow Meters (Magnetic)
  • Flow Meters (Paddle Wheel)
  • Fluoride
  • FMI Pumps
  • Fuels
  • Full Directory
  • HAA
  • Hydrazine
  • Hydrocarbons
  • Iodine
  • Ion Selective Electrodes
  • Level
  • Level Measurement
  • Manganese
  • Modular Gas Detector
  • Monochloramine
  • Multi Parameters
  • Nitrate
  • OIl in Water
  • ORP
  • Pendulum Level Switches
  • pH
  • Phosphate
  • Pneumatic Valve Units
  • Portable Gas Detector
  • Pressure Gauges
  • Redox
  • Salinity
  • Sample Conditioning
  • Sensors
  • Silica
  • Sludge Blanket
  • Sodium
  • Solenoid valves
  • Solenoid valves Hazardous
  • Specialty Pumps (Dispensing, OEM)
  • Specialty Pumps (Dispensing)
  • Specialty Pumps (Metering, OEM)
  • Specialty Pumps (Metering)
  • Specialty Pumps (Waste Transfer)
  • Specific Conductivity
  • Specific Resistivity
  • Suspended Solids
  • TDS
  • Technical Article
  • Temperature
  • Temperature Sensors
  • THM
  • TOC
  • Total Alkalinity
  • Total Dissolved Solids
  • Total Hardness
  • Total Iron
  • Total Organic Carbon
  • Toxic Gas Detector
  • Trihalomethanes
  • Turbidity
  • Universal Gas Detector
  • UVT
  • VOC
  • Water Hardness
  • Water Treatment Controller
  • Wet Gas Detector
Modular Gas Detector
A14/A11

A14/A11 Modular Gas Detector is a flexible component system providing a variety of options to meet individual gas detection and alarm requirements. From chemical and petrochemical plants to food processors, this economical and low maintenance system can be applied to…

Toxic Gas Detection – ATI A12 2 Wire Toxic Gas Transmitter
A12-2

Our UniSens universal 2-wire gas transmitter handles 28 different gases, providing the most economical and flexible gas measurement system available today. Combining universal electronics, bench calibration capability, automatic sensor verification, fault detection and alarming, and superior sensor technology, UniSens is…

 

Hydrogen Fluoride industrial uses

It is a crucial part of many production processes because of its high boiling point and chemical reactivity.

As a catalyst in petrochemical processes, hydrogen fluoride is one of the most widely used industrial chemicals. It can be used to speed up the chemical reactions needed to make polymers, synthetic fibers, medicines, and other substances. Additionally, it is employed as a cleaning agent to remove grease and oils from parts.

Types of Hydrogen Fluoride Sensors

An electrochemical sensor is the most prevalent kind of hydrogen fluoride (HF) sensor. This kind of sensor uses a chemical reaction to find out whether hydrogen fluoride is present and how much of it there is in the air. The electrodes of the sensor react with the gas of hydrogen fluoride to create an electric current. The amount of HF in the air is then calculated by measuring this current.