Combustible Gas Detector system eliminates the need for frequent response checks with ATi’s pioneering AutoTest. This transmitter performs an automatic test using self-generated gas on the sensing element every 24 hours with the world’s only self-testing AutoTest gas module for…
The revolutionary SWAN AMI Turbiwell LED online turbidity analyzer boasts unique features not found in other turbidity analyzers. The non-contact, EPA approved white light LED optical system is virtually maintenance-free. The system requires no calibration, uses no spare parts or…
The Hanna Turbidity and Chlorine HI93414 is a high accuracy Handheld analyzer. Combining nephelometer and photometer to measure key parameters in drinking water. calibration and performance verification is ensured with the supplied AMCO-AEPA-1 primary turbidity standards and NIST traceable secondary…
Detection of combustible levels of methane or other hydrocarbons % LEL. It may also be used for monitoring CO2 levels, either in ppm or percent levels. D12Ex-IR infrared gas transmitters provide analog signals for remote interface and optional relays for…
Direct–acting Type 6014 valve for individual or manifold mounting with push–over coil, for use with a variety media depending on the materials of construction. Delivered in various body materials and also suitable for use in technical vacuum Direct-acting, compact valve.…
Servo-assisted solenoid valve with diaphragm, normally closed function. Hermetic isolation of fluid from the actuator. A minimum differential pressure of 7 PSI is required to fully open the valve. Valves can be mounted or removed radially for a space-saving installation.…
The Type 5282 is a pilot-controlled normally closed solenoid valve with a servo-diaphragm, media separated, for universal use with liquid and gaseous media corresponding to the material resistance.As standard, the 3-way pivoted armature pilot drive has an emergency manual operation.…
The Type 6213 is a 2/2–way normally closed solenoid valve with a forced coupled diaphragm system. It switches from 1.5 PSI and can be used universally for fluids. For complete opening, a differential pressure of at least 1.5 PSI is…
UVT Monitor – UV Transmittance at 254 nm SWAN AMI SAC 254 UVT Monitor for the continuous measurement of UV transmittance absorption at 254 nm for organic carbon trending in potable and waste water effluent. Call Contact Description Specification Application…
Sample Conditioning for Water Analysis Sample Conditioning Accessories Sampling Equipment for Water Analyzers Call Contact Description Options Downloads To compliment our range of Water Quality analyzers, we offer solutions for Sample conditioning requirements. We offer a wide range of sample…
TOC Monitor/TOC Monitoring System Seres TOC Evolution VUV TOC Monitor with complete two-stage measurement of TOC. Detection of organic carbon (OC) with simultaneous and direct measurement of various TOC groups by oxidation and measurement of the produced CO2 (NDIR). Call…
Meridian Universal Gas Detector Teledyne The Meridian Universal Gas Detector is one detector with global approvals and a plug-and-play design, for toxic and combustible gases including; Chlorine, ClO2, Methane & 57 other gases. Call Contact Description Specification Application Options F.A.Q…
ATi’s E12-15 IR Infrared High Level Ammonia Gas Detector is a rugged, reliable, microprocessor-based, intelligent gas detector. The E12-15 IR can be used to monitor from PPM levels to explosive levels of ammonia gas. The E12-15 IR is ideally suited…
A14/A11 Modular Gas Detector is a flexible component system providing a variety of options to meet individual gas detection and alarm requirements. From chemical and petrochemical plants to food processors, this economical and low maintenance system can be applied to…
Locating the source of gas leaks can be a challenge, especially in plant areas with multiple potential leak sources. Ammonia refrigeration piping, ozone generator skids, and hazardous gas piping systems are just a few of the applications where identifying exact…
B12 Wet Gas System was developed to meet the need for reliable measurements in wet scrubber outlets for other gas streams that might be saturated with water vapor. Systems have been developed for monitoring strong oxidants (chlorine, bromine, chlorine dioxide,…
ATI’s Series F12/D provides a high level of confidence that your system is functional at all times. Our Auto-Test feature provides an actual gas “bump test” every 24 hours, verifying system integrity. Not an electronic test of some kind but…
Our UniSens universal 2-wire gas transmitter handles 28 different gases, providing the most economical and flexible gas measurement system available today. Combining universal electronics, bench calibration capability, automatic sensor verification, fault detection and alarming, and superior sensor technology, UniSens is…
MAN-R pressure gauges provide both pressure indication and optional switching capabilities within a single device. The bourdon tube sensing element and internal movement is available in a rugged copper alloy or chemically resistive stainless steel. The housings are made of…
polypropylene tethered float switches offer simple, economical liquid level monitoring. They feature your choice of a tubular or ball float in polypropylene material with a 13' TPK cable. Filling levels may be controlled by installing at least two of the…
The KOBOLD PLS pendulum level monitor is engineered for monitoring the maximum level of bulk solids in silos and storage tanks. It is made out of two elements: the pendulum rod with the measuring cone and the aluminum connection housing…
The KOBOLD NTB deep-well level probe offers a cost-effective solution for hydrostatic level measuring in wells, reservoirs, clarification plants and other water-holding vessels. It is easy to install and ideally suited for monitoring and protecting submersible pumps in deep water…
The MIST M340 RTD Temperature Transmitter consists of surface mount ring type RTD, extension cable to remote transmitter and M12 connector. It is designed for heavy duty BTU temperature measurement applications due to its very high accuracy. As all the…
Dial Thermometers are mechanical temperature indicators consisting of a pointer precisely connected to a bimetal helix stem which moves due to temperature changes in the bimetal helix. It is fabricated with extreme tolerances, which results in a very sensitive temperature…
PTS® Series (Programmable Temperature Switches) are of very compact design. This unique construction can replace other commonly used temperature switches in a variety of applications. Intempco's PTS®50A Series assemblies are built for direct immersion into processes for applications that do…
The PTS®201 is a microprocessor-based wall mounted temperature switch. It features stainless RTD probe, painted aluminum die cast housing in which electronics are potted. Based on Intempco's patented MIST technology, it offers the highest performance for the most demanding temperature…
Stainless Steel NEMA 4X Housing Battery Powered, Loop 2-wire Powered & 3-wire Powered 4-20mA Available with 2 and 3-wire LED or LCD Display Matched Pairs Option for BTU Measurement Spring Loaded Sensor Installed in Hot Tap SS316 Thermowell 1" NPT…
Series PTS02 is a Programmable Temperature Switch & Transmitter offering an analog 4-20 mA output, transistor or relay switch output, and an optional RTD output. Utilizing Intempco’s patented MIST technology, PTS02 is designed for optimum accuracy and performance. The main…
The DTG07 series Digital Temperature Gauges are a complete solution for most industrial temperature monitoring and temperature indicating applications. Of high quality construction, these gauges features a bright and large 4-digit red LED display with an analog 4-20 mA output.…
A top mount display with an adjustable compression fitting process connection the DTG03 Digital Temperature Gauge is a Digital RTD thermometer and a complete solution for most industrial temperature monitoring and temperature indicating applications. Stainless steel construction with an analog…
WJF Instrumentation Ltd.
#5 3610 – 29th Street N.E.
Calgary, Alberta
Canada
T1Y 5Z7
Calgary Head Office
Toll-Free: (877)291-5572
Standard: (403)291-5570
Ontario & Maritimes Sales:
(905)809-6918
