Walchem Water Treatment Controller with powerful built-in algorithms for control of metering pumps and valves from multiple sensor inputs.
Walchem Water Treatment Controller with powerful built-in algorithms for control of metering pumps and valves from multiple sensor inputs.
Combustible Gas Detector system eliminates the need for frequent response checks with ATi’s pioneering AutoTest. This transmitter performs an automatic test using self-generated gas on the sensing element every 24 hours with the world’s only self-testing AutoTest gas module for…
Detection of combustible levels of methane or other hydrocarbons % LEL. It may also be used for monitoring CO2 levels, either in ppm or percent levels. D12Ex-IR infrared gas transmitters provide analog signals for remote interface and optional relays for…
Meridian Universal Gas Detector Teledyne The Meridian Universal Gas Detector is one detector with global approvals and a plug-and-play design, for toxic and combustible gases including; Chlorine, ClO2, Methane & 57 other gases. Call Contact Description Specification Application Options F.A.Q…
Wet H2S gas monitor is a new type of gas sensor technology that allows continuous monitoring of hydrogen sulfide in both inlet and discharge air, where condensing humidity conditions are normal. Measurements may be either at the inlet to scrubber…
ATi’s E12-15 IR Infrared High Level Ammonia Gas Detector is a rugged, reliable, microprocessor-based, intelligent gas detector. The E12-15 IR can be used to monitor from PPM levels to explosive levels of ammonia gas. The E12-15 IR is ideally suited…
A14/A11 Modular Gas Detector is a flexible component system providing a variety of options to meet individual gas detection and alarm requirements. From chemical and petrochemical plants to food processors, this economical and low maintenance system can be applied to…
Locating the source of gas leaks can be a challenge, especially in plant areas with multiple potential leak sources. Ammonia refrigeration piping, ozone generator skids, and hazardous gas piping systems are just a few of the applications where identifying exact…
B12 Wet Gas System was developed to meet the need for reliable measurements in wet scrubber outlets for other gas streams that might be saturated with water vapor. Systems have been developed for monitoring strong oxidants (chlorine, bromine, chlorine dioxide,…
ATI’s Series F12/D provides a high level of confidence that your system is functional at all times. Our Auto-Test feature provides an actual gas “bump test” every 24 hours, verifying system integrity. Not an electronic test of some kind but…
Our UniSens universal 2-wire gas transmitter handles 28 different gases, providing the most economical and flexible gas measurement system available today. Combining universal electronics, bench calibration capability, automatic sensor verification, fault detection and alarming, and superior sensor technology, UniSens is…
The high performance Coriolis mass flow meter distinguishes itself from the competition because we are able to achieve higher flow rates and mass flow measurements in larger line sizes than other mass flow meter providers. With the TMU, we have…
The EPS offers several advantages over similar models. It is designed specifically for reliability and longevity in harsh environments, comes in a wide variety of lining materials to maximize compatibility with the process media, and offers a large selection of…
The KOBOLD PLS pendulum level monitor is engineered for monitoring the maximum level of bulk solids in silos and storage tanks. It is made out of two elements: the pendulum rod with the measuring cone and the aluminum connection housing…
The KOBOLD NTB deep-well level probe offers a cost-effective solution for hydrostatic level measuring in wells, reservoirs, clarification plants and other water-holding vessels. It is easy to install and ideally suited for monitoring and protecting submersible pumps in deep water…
The MIST M340 RTD Temperature Transmitter consists of surface mount ring type RTD, extension cable to remote transmitter and M12 connector. It is designed for heavy duty BTU temperature measurement applications due to its very high accuracy. As all the…
Dial Thermometers are mechanical temperature indicators consisting of a pointer precisely connected to a bimetal helix stem which moves due to temperature changes in the bimetal helix. It is fabricated with extreme tolerances, which results in a very sensitive temperature…
PTS® Series (Programmable Temperature Switches) are of very compact design. This unique construction can replace other commonly used temperature switches in a variety of applications. Intempco's PTS®50A Series assemblies are built for direct immersion into processes for applications that do…
The PTS®201 is a microprocessor-based wall mounted temperature switch. It features stainless RTD probe, painted aluminum die cast housing in which electronics are potted. Based on Intempco's patented MIST technology, it offers the highest performance for the most demanding temperature…
Stainless Steel NEMA 4X Housing Battery Powered, Loop 2-wire Powered & 3-wire Powered 4-20mA Available with 2 and 3-wire LED or LCD Display Matched Pairs Option for BTU Measurement Spring Loaded Sensor Installed in Hot Tap SS316 Thermowell 1" NPT…
Series PTS02 is a Programmable Temperature Switch & Transmitter offering an analog 4-20 mA output, transistor or relay switch output, and an optional RTD output. Utilizing Intempco’s patented MIST technology, PTS02 is designed for optimum accuracy and performance. The main…
The DTG07 series Digital Temperature Gauges are a complete solution for most industrial temperature monitoring and temperature indicating applications. Of high quality construction, these gauges features a bright and large 4-digit red LED display with an analog 4-20 mA output.…
A top mount display with an adjustable compression fitting process connection the DTG03 Digital Temperature Gauge is a Digital RTD thermometer and a complete solution for most industrial temperature monitoring and temperature indicating applications. Stainless steel construction with an analog…
MIST55 RTD Pt 100 temperature sensor is a complete RTD temperature sensor probe, signal conditioner and 4-20mA output. You provide the 12 to 36 Vdc loop power. The Intempco MIST patented RTD (Pt100) sensor probes contain the temperature transmitter within…
MIST M03 RTD Pt 100 temperature sensor a complete RTD temperature sensor probe, signal conditioner and 4-20mA output. Intempco MIST patented RTD (Pt100) sensor probes contain miniature programmable temperature transmitters in the TJ transition junction or in the 2 wire…
The key feature that make these sensors innovative is that they are the world’s first ever temperature sensors that have a built-in and fully programmable microprocessor-based transmitter. Intempco’s patented MIST Temperature Sensors™ are designed for optimum accuracy, performance, and for…
The Iwaki LK Series metering pumps are motor-driven, mechanically-actuated diaphragm metering pumps. This larger Series can achieve outputs up to 856 GPH (3240 l/h) and maximum pressures of 220 PSI (1.5 MPa). The LK Series is ideal for large chemical…
The EJ Series provide precise chemical injection at an economical price. Universal voltage capability enables operation from 100 – 240VAC in virtually all countries. The EJ Series are compact, simple to operate and have outputs to 3.2 GPH (12.0 LPH)…
The HI9829 is a waterproof portable logging multiparameter meter that monitors up to 14 different water quality parameters. The microprocessor based multi-sensor probe allows for the measurement of key parameters including pH, ORP, conductivity, dissolved oxygen meter, turbidity, ammonium, chloride,…
IX Series Metering Pumps are digitally controlled direct-drive diaphragm pumps. Years of experience in high-end motor technology result in extremely accurate and energy efficient metering pumps with high resolution. The IX Series meets today’s demand for automated chemical delivery in…
WJF Instrumentation Ltd.
#5 3610 – 29th Street N.E.
Calgary, Alberta
Canada
T1Y 5Z7
Calgary Head Office
Toll-Free: (877) 291-5572
Standard: (403) 291-5570
Ontario & Maritimes Sales:
Toll-Free (877) 291-5572