Combustible Gas Detector system eliminates the need for frequent response checks with ATi’s pioneering AutoTest. This transmitter performs an automatic test using self-generated gas on the sensing element every 24 hours with the world’s only self-testing AutoTest gas module for…
Detection of combustible levels of methane or other hydrocarbons % LEL. It may also be used for monitoring CO2 levels, either in ppm or percent levels. D12Ex-IR infrared gas transmitters provide analog signals for remote interface and optional relays for…
ATi’s E12-15 IR Infrared High Level Ammonia Gas Detector is a rugged, reliable, microprocessor-based, intelligent gas detector. The E12-15 IR can be used to monitor from PPM levels to explosive levels of ammonia gas. The E12-15 IR is ideally suited…
A14/A11 Modular Gas Detector is a flexible component system providing a variety of options to meet individual gas detection and alarm requirements. From chemical and petrochemical plants to food processors, this economical and low maintenance system can be applied to…
Locating the source of gas leaks can be a challenge, especially in plant areas with multiple potential leak sources. Ammonia refrigeration piping, ozone generator skids, and hazardous gas piping systems are just a few of the applications where identifying exact…
ATI’s Series F12/D provides a high level of confidence that your system is functional at all times. Our Auto-Test feature provides an actual gas “bump test” every 24 hours, verifying system integrity. Not an electronic test of some kind but…
Our UniSens universal 2-wire gas transmitter handles 28 different gases, providing the most economical and flexible gas measurement system available today. Combining universal electronics, bench calibration capability, automatic sensor verification, fault detection and alarming, and superior sensor technology, UniSens is…
The high performance Coriolis mass flow meter distinguishes itself from the competition because we are able to achieve higher flow rates and mass flow measurements in larger line sizes than other mass flow meter providers. With the TMU, we have…
The EPS offers several advantages over similar models. It is designed specifically for reliability and longevity in harsh environments, comes in a wide variety of lining materials to maximize compatibility with the process media, and offers a large selection of…
MAN-R pressure gauges provide both pressure indication and optional switching capabilities within a single device. The bourdon tube sensing element and internal movement is available in a rugged copper alloy or chemically resistive stainless steel. The housings are made of…
Offering the latest solid-state design, the KOBOLD DSD Series digital pressure gauge is an economical, battery-powered digital replacement for mechanical pressure gauges. Its ceramic pressure-sensing element provides superior stability and exceptionally long cycle life. In addition, the digital pressure gauge…
KP46 explosion-proof pressure transmitter is approved for use in hazardous locations per CSA Standard 30 and UL® Standard 1203 for Class 1, Division 1 and Division 2 hazardous locations. Wetted parts are all 316L Stainless Steel (50 up to 10000…
The MIST M340 RTD Temperature Transmitter consists of surface mount ring type RTD, extension cable to remote transmitter and M12 connector. It is designed for heavy duty BTU temperature measurement applications due to its very high accuracy. As all the…
Dial Thermometers are mechanical temperature indicators consisting of a pointer precisely connected to a bimetal helix stem which moves due to temperature changes in the bimetal helix. It is fabricated with extreme tolerances, which results in a very sensitive temperature…
PTS® Series (Programmable Temperature Switches) are of very compact design. This unique construction can replace other commonly used temperature switches in a variety of applications. Intempco's PTS®50A Series assemblies are built for direct immersion into processes for applications that do…
The PTS®201 is a microprocessor-based wall mounted temperature switch. It features stainless RTD probe, painted aluminum die cast housing in which electronics are potted. Based on Intempco's patented MIST technology, it offers the highest performance for the most demanding temperature…
Stainless Steel NEMA 4X Housing Battery Powered, Loop 2-wire Powered & 3-wire Powered 4-20mA Available with 2 and 3-wire LED or LCD Display Matched Pairs Option for BTU Measurement Spring Loaded Sensor Installed in Hot Tap SS316 Thermowell 1" NPT…
Series PTS02 is a Programmable Temperature Switch & Transmitter offering an analog 4-20 mA output, transistor or relay switch output, and an optional RTD output. Utilizing Intempco’s patented MIST technology, PTS02 is designed for optimum accuracy and performance. The main…
The DTG07 series Digital Temperature Gauges are a complete solution for most industrial temperature monitoring and temperature indicating applications. Of high quality construction, these gauges features a bright and large 4-digit red LED display with an analog 4-20 mA output.…
A top mount display with an adjustable compression fitting process connection the DTG03 Digital Temperature Gauge is a Digital RTD thermometer and a complete solution for most industrial temperature monitoring and temperature indicating applications. Stainless steel construction with an analog…
MIST55 RTD Pt 100 temperature sensor is a complete RTD temperature sensor probe, signal conditioner and 4-20mA output. You provide the 12 to 36 Vdc loop power. The Intempco MIST patented RTD (Pt100) sensor probes contain the temperature transmitter within…
MIST M03 RTD Pt 100 temperature sensor a complete RTD temperature sensor probe, signal conditioner and 4-20mA output. Intempco MIST patented RTD (Pt100) sensor probes contain miniature programmable temperature transmitters in the TJ transition junction or in the 2 wire…
The key feature that make these sensors innovative is that they are the world’s first ever temperature sensors that have a built-in and fully programmable microprocessor-based transmitter. Intempco’s patented MIST Temperature Sensors™ are designed for optimum accuracy, performance, and for…
Propane Calibration Gas – Cal Gas Propane Calibration Gases The best pricing in the industry with fast delivery Call Contact Home > Calibration Gas > Propane Calibration Gas Description Specification Accessories Downloads The Best Pricing in the Industry & Fast…
Hydrogen Calibration Gas – H2 Cal Gas Hydrogen Calibration Gases The best pricing in the industry with fast delivery Call Contact Home > Calibration Gas > Hydrogen Calibration Gas Description Specification Accessories Downloads The Best Pricing in the Industry &…
4 Gas Calibration Gas Available in multiple variations to meet your needs. H2S, Methane or Pentane, CO, O2 The best pricing in the industry with fast delivery Call Contact Home > Calibration Gas > 4 Gas Calibration Gas Description Specification…
Bump Test Gas – 4-Gas Monitor Testing. Bump Test Gases The best pricing in the industry with fast delivery Call Contact Home > Calibration Gas > Bump Test Gas Description Specification Accessories Downloads The Best Pricing in the Industry &…
Carbon Dioxide Calibration Gas – CO2 Cal Gas Carbon Dioxide Calibration Gases The best pricing in the industry with fast delivery Call Contact Home > Calibration Gas > Carbon Dioxide Calibration Gas – CO2 Cal Gas Description Specification Accessories Downloads…
WJF Instrumentation Ltd.
#5 3610 – 29th Street N.E.
Calgary, Alberta
Canada
T1Y 5Z7
Calgary Head Office
Toll-Free: (877)291-5572
Standard: (403)291-5570
Ontario & Maritimes Sales:
(905)809-6918
