The Calibration Gas Generator, equipped with easily replaceable electrochemical generating sources, sets a reliable standard for the precise calibration of both fixed and portable detection systems, regardless of the manufacturer.
The CAL 2000 is designed with advanced microprocessor control and features an LCD display, enabling users to adjust the concentration and flow rate directly in the field. The generating sources are not only interchangeable but can also be replaced on-site, ensuring minimal downtime.
A key advantage of the CAL 2000 is its cost efficiency; its generating source produces up to 50 times more calibration gas compared to a disposable cylinder, and it does so at a cost equivalent to just two cylinders. Additionally, the CAL 2000 gas instrument is equipped with an integrated mass flow sensor that automatically adjusts for variations in altitude and temperature, ensuring accurate readings in diverse conditions.
- NIST traceable certification.
- Interchangeable calibration gases.
- Adjustable PPM and flow rate.
- Unlimited shelf life.
- Non-hazardous shipping.
- Intrinsically safe (CSA Certified).
The Cal 2000 instrument has a built-in mass flow sensor that automatically compensates for altitude and temperature. A mass flow sensor, combined with the instruments’ internal pump, provides extreme flexibility for calibrating both diffusion and sample draw detection systems.
CSA NRTL/C Exia T-6 approved intrinsically safe with CE mark and ATEX Certification
Calibration Gas Kit:
This instrument, with one or more required Gas Sources, is a complete calibration gas kit.
- Nitrogen Dioxide (NO2)
- Ammonia (NH3)
- Chlorine (CL2)
- Chlorine Dioxide (CL O2)
- Hydrogen Sulfide (H2S)
- Hydrogen (H2)
- Hydrogen Cyanide (HCN)
| Air flow rate (with internal pump) | 0.2 to 1 LPM |
| Sample draw rate (with pump disabled) | 0.2 to 5 LPM |
| Useful source life | 10, 50 or 100 hours |
| Warm-up time (to 90%) | Approximately 5 minutes |
| L x W x H | 8.50 x 4.25 x 3.00′ (21.59 x 10.8 x 7.62 cm) |
| Weight | 3 lb. (1360 g) |
| Operating temperature | 0° C to 50° C |
| Relative humidity (intermittent use) | 0 -100% |
| Accuracy | ±10% (+/- 5% available) |
| Repeatability | ±5% |
| Battery power | 4 alkaline ‘C’ |
| Battery life | 10 hours (at .5 LPM flow rate) |
Calibration gas generators are used for any type of gas detector.
| Chlorine Micro-Source (Cl2) | 0.05 – 1.0 ppm |
| Chlorine (Cl2) | 0.5 – 50.0 PPM |
| Chlorine Dioxide (ClO2) | 0.5 – 5.0 PPM |
| Hydrogen (H2) | 0.5 – 50.0 PPM |
| Hydrogen Cyanide (HCN) | 0.5 – 50.0 PPM |
| Hydrogen Sulfide Micro-Source(H2S) | 0.05 – 1.0 PPM |
| Hydrogen Sulfide (H2S) | 0.5 – 50.0 PPM |
| Nitrogen Dioxide (NO2) | 0.05 – 5.0 PPM |
| Ammonia (NH3) | 1.0 – 100.0 PPM |
| Air Flow Rate | 0.2 to 1 LPM (with internal pump) |
| Sample draw rate | 0.2 to 1 LPM (with pump disabled) |
| Useful Source Life | 10, 50 or 100 hours |
| Warm-up time (to 90%) | Approx. 5 mins. |
| L x W x H | 8.50 x 4.25 x 3.00” (21.59 x 10.8 x 7.62 cm) |
| Weight | 3 lb. (1360 g) |
| Operating Temperature | 0° C to 50° C |
| Relative Humidity (intermittent use) | 0 -100% |
| Accuracy | ±10% (±5% available) |
| Repeatability | ±5% |
| Battery Power | 4 alkaline “C” |
| Battery Life | 10 hours (at .5 LPM flow rate) |
A Calibration Gas Generator is a specialized device designed to produce precise quantities of calibration gas, essential for accurately calibrating both fixed and portable gas detection systems. These generators are equipped with replaceable electrochemical generating sources, which allow them to serve as a dependable standard for calibration across various manufacturers’ equipment.
One such example is the CAL 2000, which stands out due to its microprocessor-controlled operation and user-friendly LCD display. This allows for field adjustments of gas concentration and flow rate. Moreover, the CAL 2000’s generating sources are both interchangeable and field replaceable, providing flexibility and ease of use.
A notable feature of this generator is its efficiency—it can produce up to 50 times more calibration gas than traditional disposable cylinders, at a fraction of the cost. Additionally, it includes an integrated mass flow sensor that automatically compensates for changes in altitude and temperature, ensuring accurate and reliable calibration in a wide range of conditions.
Intrinsically safe (CSA Certified) and NIST traceable certification.
The Calibration Gas Generator, equipped with easily replaceable electrochemical generating sources, sets a reliable standard for the precise calibration of both fixed and portable detection systems, regardless of the manufacturer.
The CAL 2000 is designed with advanced microprocessor control and features an LCD display, enabling users to adjust the concentration and flow rate directly in the field. The generating sources are not only interchangeable but can also be replaced on-site, ensuring minimal downtime.
A key advantage of the CAL 2000 is its cost efficiency; its generating source produces up to 50 times more calibration gas compared to a disposable cylinder, and it does so at a cost equivalent to just two cylinders. Additionally, the CAL 2000 gas instrument is equipped with an integrated mass flow sensor that automatically adjusts for variations in altitude and temperature, ensuring accurate readings in diverse conditions.
- NIST traceable certification.
- Interchangeable calibration gases.
- Adjustable PPM and flow rate.
- Unlimited shelf life.
- Non-hazardous shipping.
- Intrinsically safe (CSA Certified).
The Cal 2000 instrument has a built-in mass flow sensor that automatically compensates for altitude and temperature. A mass flow sensor, combined with the instruments’ internal pump, provides extreme flexibility for calibrating both diffusion and sample draw detection systems.
CSA NRTL/C Exia T-6 approved intrinsically safe with CE mark and ATEX Certification
Calibration Gas Kit:
This instrument, with one or more required Gas Sources, is a complete calibration gas kit.
- Nitrogen Dioxide (NO2)
- Ammonia (NH3)
- Chlorine (CL2)
- Chlorine Dioxide (CL O2)
- Hydrogen Sulfide (H2S)
- Hydrogen (H2)
- Hydrogen Cyanide (HCN)
| Air flow rate (with internal pump) | 0.2 to 1 LPM |
| Sample draw rate (with pump disabled) | 0.2 to 5 LPM |
| Useful source life | 10, 50 or 100 hours |
| Warm-up time (to 90%) | Approximately 5 minutes |
| L x W x H | 8.50 x 4.25 x 3.00′ (21.59 x 10.8 x 7.62 cm) |
| Weight | 3 lb. (1360 g) |
| Operating temperature | 0° C to 50° C |
| Relative humidity (intermittent use) | 0 -100% |
| Accuracy | ±10% (+/- 5% available) |
| Repeatability | ±5% |
| Battery power | 4 alkaline ‘C’ |
| Battery life | 10 hours (at .5 LPM flow rate) |
Calibration gas generators are used for any type of gas detector.
| Chlorine Micro-Source (Cl2) | 0.05 – 1.0 ppm |
| Chlorine (Cl2) | 0.5 – 50.0 PPM |
| Chlorine Dioxide (ClO2) | 0.5 – 5.0 PPM |
| Hydrogen (H2) | 0.5 – 50.0 PPM |
| Hydrogen Cyanide (HCN) | 0.5 – 50.0 PPM |
| Hydrogen Sulfide Micro-Source(H2S) | 0.05 – 1.0 PPM |
| Hydrogen Sulfide (H2S) | 0.5 – 50.0 PPM |
| Nitrogen Dioxide (NO2) | 0.05 – 5.0 PPM |
| Ammonia (NH3) | 1.0 – 100.0 PPM |
| Air Flow Rate | 0.2 to 1 LPM (with internal pump) |
| Sample draw rate | 0.2 to 1 LPM (with pump disabled) |
| Useful Source Life | 10, 50 or 100 hours |
| Warm-up time (to 90%) | Approx. 5 mins. |
| L x W x H | 8.50 x 4.25 x 3.00” (21.59 x 10.8 x 7.62 cm) |
| Weight | 3 lb. (1360 g) |
| Operating Temperature | 0° C to 50° C |
| Relative Humidity (intermittent use) | 0 -100% |
| Accuracy | ±10% (±5% available) |
| Repeatability | ±5% |
| Battery Power | 4 alkaline “C” |
| Battery Life | 10 hours (at .5 LPM flow rate) |
A Calibration Gas Generator is a specialized device designed to produce precise quantities of calibration gas, essential for accurately calibrating both fixed and portable gas detection systems. These generators are equipped with replaceable electrochemical generating sources, which allow them to serve as a dependable standard for calibration across various manufacturers’ equipment.
One such example is the CAL 2000, which stands out due to its microprocessor-controlled operation and user-friendly LCD display. This allows for field adjustments of gas concentration and flow rate. Moreover, the CAL 2000’s generating sources are both interchangeable and field replaceable, providing flexibility and ease of use.
A notable feature of this generator is its efficiency—it can produce up to 50 times more calibration gas than traditional disposable cylinders, at a fraction of the cost. Additionally, it includes an integrated mass flow sensor that automatically compensates for changes in altitude and temperature, ensuring accurate and reliable calibration in a wide range of conditions.
Intrinsically safe (CSA Certified) and NIST traceable certification.
