This analyzer is designed for the automatic and continuous measurement of acid cation conductivity in feedwater, steam, and condensate systems.
Conductivity Measurement: It accurately measures conductivity after passing through a cation exchanger, ensuring precise monitoring of water quality.
Precision Sensors: The analyzer features two precision conductivity sensors with a slot-lock design and an integrated Pt1000 temperature probe, providing reliable and consistent measurements.
Cation Exchanger Replacement: The cation exchanger is easy to replace, allowing for minimal downtime and efficient maintenance.
Automatic Deaeration: The system includes an automatic deaeration feature for the cation exchanger, enhancing measurement accuracy by eliminating air bubbles.
Optional Pre-Rinse Setup: An optional pre-rinse setup is available, enabling instantaneous resin exchange and ensuring that the system is ready for use immediately after maintenance.
Factory Tested: The analyzer is thoroughly tested at the factory and comes fully prepared for installation and operation, ensuring a smooth and hassle-free setup.
Analytical System
- Conductivity measurement range:
- 0.055 to 1000 μS/cm
- High precision:
- ± 1 % of the measured value
- Temperature compensation:
- non linear function for high purity water
- neutral salts
- strong acids
- strong bases
- Ammonia, Ethanolamine
- Morpholine
- Linear coefficient in %/°C
- Absolute (none)
- AMI Electronic Unit
- Rugged aluminum housing (IP66)
- Two freely scalable current signal outputs (0/4-20 mA), third one as an option
- Optional fieldbus communication board (Profibus, Modbus, Webserver)
- Flow-Cell with Sensors
- Stainless steel flow cell with integrated needle valve and digital sample flow meter
- Quick sensor release with patented slot-lock design.
Power and Steam Applications.
Consumables
| Order/No. | Description |
|---|---|
| A-82.841.030 | Cation exchanger – bottle; 1 liter, full |
| A-82.841.035 | Cation exchanger – resin, 10 liters, without bottle |
| A-82.849.010 | Set of spare filters CATCON, 5 pcs. |
Accessories
| Order/No. | Description |
|---|---|
| A-75.310.000 | QS-Monitor AMI INSPECTOR Conductivity |
| A-75.310.002 | QS-Monitor AMI INSPECTOR Conductivity, 2 m sensor cable |
| A-81.420.020 | AMI Option; Profibus- / Modbus Interface |
| A-81.420.042 | AMI Option; USB Interface |
| A-81.420.050 | AMI Option; 3rd signal output |
| A-81.420.060 | AMI Option; HART Interface |
| A-82.841.030 | Cation exchanger – bottle; 1 liter, full |
| A-88.224.220 | Communication cable, AMI to PC, 2 m |
Spare parts
| Order/No. | Description |
|---|---|
| A-83.910.100 | Blind plug 3/4″ NPT slot-lock, stainless steel |
| A-86.190.070 | Tubing kit for CATCON with DA |
| A-89.811.060 | Set of fuses for AMI |
| C-82.930.040 | Bottle PP 1 Litre |
- Transmitter temperature monitoring with programmable high/low alarm limits
- 1 Alarm relay One potential free contact for summary alarm indication for programmable alarm values and instrument faults. Maximum load: 1A / 250 VAC
- 1 Input One input for potential-free contact. Programmable hold or remote off function.
- 2 Relay outputs Two potential-free contacts programmable as limit switches for measuring values, controllers or timer for system cleaning with automatic hold function. Rated load: 1A / 250 VAC
- 2 Signal outputs (3rd as option)Two programmable signal outputs for measured values (freely scalable, linear or bilinear) or as continuous control outputs (control parameters programmable) as current source.
- 3rd signal output selectable as cur-rent source or current sink. Current loop: 0/4 – 20 mA Maximum burden: 510 Control functions Relays or current outputs programmable for 1 or 2 pulse dosing pumps, solenoid valves or for one motor valve. Programmable P, PI, PID or PD control parameters.
- 1 Communication interface (option) RS485 interface (galvanically separated) with Fieldbus protocol Modbus RTU or Pro-fibus DP / 3rd Signal output / USB int
- SD card interface Possibility to record measured values and diagnostic data to an SD card. SD card included.
All Swan Analyzers are CSA Certified before shipping.
5 to 20 L/h
This analyzer is designed for the automatic and continuous measurement of acid cation conductivity in feedwater, steam, and condensate systems.
Conductivity Measurement: It accurately measures conductivity after passing through a cation exchanger, ensuring precise monitoring of water quality.
Precision Sensors: The analyzer features two precision conductivity sensors with a slot-lock design and an integrated Pt1000 temperature probe, providing reliable and consistent measurements.
Cation Exchanger Replacement: The cation exchanger is easy to replace, allowing for minimal downtime and efficient maintenance.
Automatic Deaeration: The system includes an automatic deaeration feature for the cation exchanger, enhancing measurement accuracy by eliminating air bubbles.
Optional Pre-Rinse Setup: An optional pre-rinse setup is available, enabling instantaneous resin exchange and ensuring that the system is ready for use immediately after maintenance.
Factory Tested: The analyzer is thoroughly tested at the factory and comes fully prepared for installation and operation, ensuring a smooth and hassle-free setup.
Analytical System
- Conductivity measurement range:
- 0.055 to 1000 μS/cm
- High precision:
- ± 1 % of the measured value
- Temperature compensation:
- non linear function for high purity water
- neutral salts
- strong acids
- strong bases
- Ammonia, Ethanolamine
- Morpholine
- Linear coefficient in %/°C
- Absolute (none)
- AMI Electronic Unit
- Rugged aluminum housing (IP66)
- Two freely scalable current signal outputs (0/4-20 mA), third one as an option
- Optional fieldbus communication board (Profibus, Modbus, Webserver)
- Flow-Cell with Sensors
- Stainless steel flow cell with integrated needle valve and digital sample flow meter
- Quick sensor release with patented slot-lock design.
Power and Steam Applications.
Consumables
| Order/No. | Description |
|---|---|
| A-82.841.030 | Cation exchanger – bottle; 1 liter, full |
| A-82.841.035 | Cation exchanger – resin, 10 liters, without bottle |
| A-82.849.010 | Set of spare filters CATCON, 5 pcs. |
Accessories
| Order/No. | Description |
|---|---|
| A-75.310.000 | QS-Monitor AMI INSPECTOR Conductivity |
| A-75.310.002 | QS-Monitor AMI INSPECTOR Conductivity, 2 m sensor cable |
| A-81.420.020 | AMI Option; Profibus- / Modbus Interface |
| A-81.420.042 | AMI Option; USB Interface |
| A-81.420.050 | AMI Option; 3rd signal output |
| A-81.420.060 | AMI Option; HART Interface |
| A-82.841.030 | Cation exchanger – bottle; 1 liter, full |
| A-88.224.220 | Communication cable, AMI to PC, 2 m |
Spare parts
| Order/No. | Description |
|---|---|
| A-83.910.100 | Blind plug 3/4″ NPT slot-lock, stainless steel |
| A-86.190.070 | Tubing kit for CATCON with DA |
| A-89.811.060 | Set of fuses for AMI |
| C-82.930.040 | Bottle PP 1 Litre |
- Transmitter temperature monitoring with programmable high/low alarm limits
- 1 Alarm relay One potential free contact for summary alarm indication for programmable alarm values and instrument faults. Maximum load: 1A / 250 VAC
- 1 Input One input for potential-free contact. Programmable hold or remote off function.
- 2 Relay outputs Two potential-free contacts programmable as limit switches for measuring values, controllers or timer for system cleaning with automatic hold function. Rated load: 1A / 250 VAC
- 2 Signal outputs (3rd as option)Two programmable signal outputs for measured values (freely scalable, linear or bilinear) or as continuous control outputs (control parameters programmable) as current source.
- 3rd signal output selectable as cur-rent source or current sink. Current loop: 0/4 – 20 mA Maximum burden: 510 Control functions Relays or current outputs programmable for 1 or 2 pulse dosing pumps, solenoid valves or for one motor valve. Programmable P, PI, PID or PD control parameters.
- 1 Communication interface (option) RS485 interface (galvanically separated) with Fieldbus protocol Modbus RTU or Pro-fibus DP / 3rd Signal output / USB int
- SD card interface Possibility to record measured values and diagnostic data to an SD card. SD card included.
All Swan Analyzers are CSA Certified before shipping.
5 to 20 L/h
