316 Stainless Steel Magnetic Drive Rotary Vane Pump for Hydrocarbons, Solvents & Hazardous Liquids
HTP - AISI 316
The HTP series magnetic drive vane pumps are constructed from AISI 316 stainless steel, making them suitable for hydrocarbons, solvents, heat transfer oils, refrigerants, cryogenic fluids, and radioactive liquids. The innovative magnetic drive system minimizes the risk of leaks and emissions while reducing maintenance costs.
The HTP series magnetic drive vane pumps are constructed from AISI 316 stainless steel, making them suitable for hydrocarbons, solvents, heat transfer oils, refrigerants, cryogenic fluids, and radioactive liquids.
The innovative magnetic drive system minimizes the risk of leaks and emissions while reducing maintenance costs. HTP pumps are ideal for low-flow, high-head applications such as pilot plants, sampling, and mechanical seal flushing. They are specifically designed for thin, non-lubricating liquids and/or applications with high differential pressures.
Anti-corrosion industrial pumps suitable for pumping acids and bases fluids and highly corrosive liquids
- Materials available: AISI 316.
- Materials in contact with the liquid:
pump body, end cover and rotor: AISI 316;
o-ring: EPDM/VITON; carbon graphite stator. - Max flow: 2100 l/h. Max pressure 13 bar.
- Temperature range: from – 70°C to + 200°C.
- Max viscosity: 2000 cPs.
- System Pressure 25 bar at 20°C.
- Available in ATEX version for zone 1 II3G and zone 2 II3G (pump mod. EM-P).
Manufacturing materials
HTP pumps are made of stainless steel AISI 316 and they are compatible with most acids and basic liquids, chemicals and other dangerous fluids.
Magnets
HTP series pumps are equipped with NdFeB magnets that ensure high magnetic torque.
Leak free magnetic design
Advantages of magnetic drive pumps:
– no mechanical seal
– no leakage and emissions
– no motor/pump alignment
– environmental sustainability
– reliability and safety
– limited periodic maintenance with long-term savings
Volumetric Vanes
HTP vane pumps are designed to operate with low flow rates, high head and constant flow.
Their flow is directly proportional to the speed of the motor and are able to pump liquids with viscosity up to 2000 cps.
Magnetic drive pumps are designed with a special sealless configuration that is suitable for transferring acids, chemicals, corrosive and dangerous liquids thanks to the high chemical resistance of their construction materials and to the absence of leakage and emissions. The structure is really simple and it requires very little maintenance with consequent saving in terms of repairing, spare parts and machine downtime (costs during the pump life). This type of pump is not suitable for transferring liquids with solids. Liquid must necessarily be clean and free of suspended solids.
* The pump’s flow rate and output are specified for pumping water at room temperature. If you pump liquids with higher temperature, viscosity, or density, the performance must be recalculated accordingly. The electric motor is selected based on the viscosity and density values provided.
- Chemical and pharmaceutical industries
- Loading and Unloading liquid tankers
- Transfer of chemicals from storage to production lines
- Solvent recovery systems
- Transfer of chemicals to and from various containers (IBC- DRUMS etc)
- Effluent treatment
- Liquids waste recovery from containing walls
- Mining Sector
- Sulfuric acid
- Aqua regia
- Sodium metabisulfite
- Hydrofluoric acid (Fluoridric acid)
- Oxidizing agents
(including peracetic acid)
- Air / gas treatment
- Biogas plants – H2S elimination systems (Desulfurators)
- Wet scrubber abatement systems (in-tank vertical pumps or external horizontal pumps)
- NOx and SOx elimination systems (urea)
- Detergents and sanitizers
- Loading and Unloading liquid tankers
- Bottling machines, filling machines and equipment
- Chemical transfers
- Cosmetics
- Energy
- Lead Acid Battery Production
- Recycling
- Stack systems for cell batteries – electrolytes
- Hydrogen production
- Steel & aluminum industry
- Extrusion plants (matrix cleaning with NaOH)
- Pickling
- Galvanic industry
- Galvanic plants manufacturers
- Cleaning of banknote molds
- Printing machines (cleaning)
- Electroplating /Galvanic process
- Oil and gas
- Methane / Gas odorization systems
- Sulfur cycle / fatty acid saponification
- Sampling systems
- PCB industry
- PCB manufacturers for samples in home appliances and automotive sector
- Manufacturers of tanks and dedicated plant engineering
- Food industry
- Clean-in-place (C.I.P.) systems for food industry
- Cheese salting
- Dairies
- Textile industries
- Dye-works, fabric coloring and fixing (sodium hydroxide and acetic acid)
- Industrial laundries (bleaching)
The HTP series magnetic drive vane pumps are constructed from AISI 316 stainless steel, making them suitable for hydrocarbons, solvents, heat transfer oils, refrigerants, cryogenic fluids, and radioactive liquids.
The innovative magnetic drive system minimizes the risk of leaks and emissions while reducing maintenance costs. HTP pumps are ideal for low-flow, high-head applications such as pilot plants, sampling, and mechanical seal flushing. They are specifically designed for thin, non-lubricating liquids and/or applications with high differential pressures.
Anti-corrosion industrial pumps suitable for pumping acids and bases fluids and highly corrosive liquids
- Materials available: AISI 316.
- Materials in contact with the liquid:
pump body, end cover and rotor: AISI 316;
o-ring: EPDM/VITON; carbon graphite stator. - Max flow: 2100 l/h. Max pressure 13 bar.
- Temperature range: from – 70°C to + 200°C.
- Max viscosity: 2000 cPs.
- System Pressure 25 bar at 20°C.
- Available in ATEX version for zone 1 II3G and zone 2 II3G (pump mod. EM-P).
Manufacturing materials
HTP pumps are made of stainless steel AISI 316 and they are compatible with most acids and basic liquids, chemicals and other dangerous fluids.
Magnets
HTP series pumps are equipped with NdFeB magnets that ensure high magnetic torque.
Leak free magnetic design
Advantages of magnetic drive pumps:
– no mechanical seal
– no leakage and emissions
– no motor/pump alignment
– environmental sustainability
– reliability and safety
– limited periodic maintenance with long-term savings
Volumetric Vanes
HTP vane pumps are designed to operate with low flow rates, high head and constant flow.
Their flow is directly proportional to the speed of the motor and are able to pump liquids with viscosity up to 2000 cps.
Magnetic drive pumps are designed with a special sealless configuration that is suitable for transferring acids, chemicals, corrosive and dangerous liquids thanks to the high chemical resistance of their construction materials and to the absence of leakage and emissions. The structure is really simple and it requires very little maintenance with consequent saving in terms of repairing, spare parts and machine downtime (costs during the pump life). This type of pump is not suitable for transferring liquids with solids. Liquid must necessarily be clean and free of suspended solids.
* The pump’s flow rate and output are specified for pumping water at room temperature. If you pump liquids with higher temperature, viscosity, or density, the performance must be recalculated accordingly. The electric motor is selected based on the viscosity and density values provided.
- Chemical and pharmaceutical industries
- Loading and Unloading liquid tankers
- Transfer of chemicals from storage to production lines
- Solvent recovery systems
- Transfer of chemicals to and from various containers (IBC- DRUMS etc)
- Effluent treatment
- Liquids waste recovery from containing walls
- Mining Sector
- Sulfuric acid
- Aqua regia
- Sodium metabisulfite
- Hydrofluoric acid (Fluoridric acid)
- Oxidizing agents
(including peracetic acid)
- Air / gas treatment
- Biogas plants – H2S elimination systems (Desulfurators)
- Wet scrubber abatement systems (in-tank vertical pumps or external horizontal pumps)
- NOx and SOx elimination systems (urea)
- Detergents and sanitizers
- Loading and Unloading liquid tankers
- Bottling machines, filling machines and equipment
- Chemical transfers
- Cosmetics
- Energy
- Lead Acid Battery Production
- Recycling
- Stack systems for cell batteries – electrolytes
- Hydrogen production
- Steel & aluminum industry
- Extrusion plants (matrix cleaning with NaOH)
- Pickling
- Galvanic industry
- Galvanic plants manufacturers
- Cleaning of banknote molds
- Printing machines (cleaning)
- Electroplating /Galvanic process
- Oil and gas
- Methane / Gas odorization systems
- Sulfur cycle / fatty acid saponification
- Sampling systems
- PCB industry
- PCB manufacturers for samples in home appliances and automotive sector
- Manufacturers of tanks and dedicated plant engineering
- Food industry
- Clean-in-place (C.I.P.) systems for food industry
- Cheese salting
- Dairies
- Textile industries
- Dye-works, fabric coloring and fixing (sodium hydroxide and acetic acid)
- Industrial laundries (bleaching)
