316 Stainless Steel Mag Drive Regenerative Turbine for Hydrocarbons, Solvents & Hazardous Liquids
HTA – AISI 316
HTA series magnetic drive regenerative turbine pumps are made of AISI 316 stainless steel and designed for solvents, hydrocarbons, and other hazardous or flammable liquids. The seal-less magnetic drive system minimizes leakage and emissions while reducing maintenance costs.
This HTA series magnetic drive regenerative turbine pump is manufactured in AISI 316 stainless steel and are designed for handling solvents, hydrocarbons, and other hazardous or flammable liquids. The advanced magnetic drive system eliminates the need for mechanical seals, significantly reducing the risk of leakage and emissions while lowering maintenance costs.
Power is transmitted through magnetic coupling, allowing fully seal-less operation. This design ensures a high level of hermetic safety and operating efficiency. The pumped liquid must be clean and free of suspended solids.
HTA series pumps are also available in ATEX-certified versions for Zone 1 (II 2G) and Zone 2 (II 3G), model EM-T.
Anti-corrosion industrial pumps suitable for solvents, hydrocarbons, dangerous and inflammable liquids
- High head / low flow capability minimizes by-pass requirements.
- Materials available: AISI 316;
- Materials in contact with the liquid:casing and impeller: stainless steel AISI 316;o-ring EPDM/VITON;bushing: PTFEC; shaft: Hastelloy C276.
- Max flow 7 m3/h; max head 76 mlc.
- Max Temperature: 160°C.
- Pressure Rating NP 25 at 20°C.
- Impeller design handles up to 20% entrained gas.
- Ideal for pumping liquefied gas.
- Available in ATE X version for zone 1 II2G and zone 2 II3G(pump mod. EM-T).
Manufacturing Materials
HTA pumps are made of AISI 316 and they are compatible with most solvents, alkalis and organic acids.
Leak Free Magnetic Design
Advantages of magnetic drive pumps:
– no mechanical seal
– no leakage and emissions
– no motor/pump alignment
– environmental sustainability
– reliability and safety
– limited periodic maintenance with long-term savings
Reversible Connections
In the HTA series pumps In and Out connections can be reversed changing the rotation direction of the motor.
Static Shaft
The static shaft of the mag drive centrifugal pumps HTA series are made of Hastelloy (HC 276), an extremely resistant material, which guarantees the maximum stability and resistance to aggressive chemicals.
Magnets
The HTA pumps are equipped with NdFeB magnets that ensure a high magnetic torque.
Magnetic drive pumps are designed with a special sealless configuration that is suitable for transferring acids, chemicals, corrosive and dangerous liquids thanks to the high chemical resistance of their construction materials and to the absence of leakage and emissions. The structure is really simple and it requires very little maintenance with consequent saving in terms of repairing, spare parts and machine downtime (costs during the pump life). This type of pump is not suitable for transferring liquids with solids. Liquid must necessarily be clean and free of suspended solids.
* The pump’s flow rate and output are specified for pumping water at room temperature. If you pump liquids with higher temperature, viscosity, or density, the performance must be recalculated accordingly. The electric motor is selected based on the viscosity and density values provided.
- Chemical and pharmaceutical industries
- Loading and Unloading liquid tankers
- Transfer of chemicals from storage to production lines
- Solvent recovery systems
- Transfer of chemicals to and from various containers (IBC- DRUMS etc)
- Effluent treatment
- Liquids waste recovery from containing walls
- Mining Sector
- Sulfuric acid
- Aqua regia
- Sodium metabisulfite
- Hydrofluoric acid (Fluoridric acid)
- Oxidizing agents
(including peracetic acid)
- Air / gas treatment
- Biogas plants – H2S elimination systems (Desulfurators)
- Wet scrubber abatement systems (in-tank vertical pumps or external horizontal pumps)
- NOx and SOx elimination systems (urea)
- Detergents and sanitizers
- Loading and Unloading liquid tankers
- Bottling machines, filling machines and equipment
- Chemical transfers
- Cosmetics
- Energy
- Lead Acid Battery Production
- Recycling
- Stack systems for cell batteries – electrolytes
- Hydrogen production
- Steel & aluminum industry
- Extrusion plants (matrix cleaning with NaOH)
- Pickling
- Galvanic industry
- Galvanic plants manufacturers
- Cleaning of banknote molds
- Printing machines (cleaning)
- Electroplating /Galvanic process
- Oil and gas
- Methane / Gas odorization systems
- Sulfur cycle / fatty acid saponification
- Sampling systems
- PCB industry
- PCB manufacturers for samples in home appliances and automotive sector
- Manufacturers of tanks and dedicated plant engineering
- Food industry
- Clean-in-place (C.I.P.) systems for food industry
- Cheese salting
- Dairies
- Textile industries
- Dye-works, fabric coloring and fixing (sodium hydroxide and acetic acid)
- Industrial laundries (bleaching)
This HTA series magnetic drive regenerative turbine pump is manufactured in AISI 316 stainless steel and are designed for handling solvents, hydrocarbons, and other hazardous or flammable liquids. The advanced magnetic drive system eliminates the need for mechanical seals, significantly reducing the risk of leakage and emissions while lowering maintenance costs.
Power is transmitted through magnetic coupling, allowing fully seal-less operation. This design ensures a high level of hermetic safety and operating efficiency. The pumped liquid must be clean and free of suspended solids.
HTA series pumps are also available in ATEX-certified versions for Zone 1 (II 2G) and Zone 2 (II 3G), model EM-T.
Anti-corrosion industrial pumps suitable for solvents, hydrocarbons, dangerous and inflammable liquids
- High head / low flow capability minimizes by-pass requirements.
- Materials available: AISI 316;
- Materials in contact with the liquid:casing and impeller: stainless steel AISI 316;o-ring EPDM/VITON;bushing: PTFEC; shaft: Hastelloy C276.
- Max flow 7 m3/h; max head 76 mlc.
- Max Temperature: 160°C.
- Pressure Rating NP 25 at 20°C.
- Impeller design handles up to 20% entrained gas.
- Ideal for pumping liquefied gas.
- Available in ATE X version for zone 1 II2G and zone 2 II3G(pump mod. EM-T).
Manufacturing Materials
HTA pumps are made of AISI 316 and they are compatible with most solvents, alkalis and organic acids.
Leak Free Magnetic Design
Advantages of magnetic drive pumps:
– no mechanical seal
– no leakage and emissions
– no motor/pump alignment
– environmental sustainability
– reliability and safety
– limited periodic maintenance with long-term savings
Reversible Connections
In the HTA series pumps In and Out connections can be reversed changing the rotation direction of the motor.
Static Shaft
The static shaft of the mag drive centrifugal pumps HTA series are made of Hastelloy (HC 276), an extremely resistant material, which guarantees the maximum stability and resistance to aggressive chemicals.
Magnets
The HTA pumps are equipped with NdFeB magnets that ensure a high magnetic torque.
Magnetic drive pumps are designed with a special sealless configuration that is suitable for transferring acids, chemicals, corrosive and dangerous liquids thanks to the high chemical resistance of their construction materials and to the absence of leakage and emissions. The structure is really simple and it requires very little maintenance with consequent saving in terms of repairing, spare parts and machine downtime (costs during the pump life). This type of pump is not suitable for transferring liquids with solids. Liquid must necessarily be clean and free of suspended solids.
* The pump’s flow rate and output are specified for pumping water at room temperature. If you pump liquids with higher temperature, viscosity, or density, the performance must be recalculated accordingly. The electric motor is selected based on the viscosity and density values provided.
- Chemical and pharmaceutical industries
- Loading and Unloading liquid tankers
- Transfer of chemicals from storage to production lines
- Solvent recovery systems
- Transfer of chemicals to and from various containers (IBC- DRUMS etc)
- Effluent treatment
- Liquids waste recovery from containing walls
- Mining Sector
- Sulfuric acid
- Aqua regia
- Sodium metabisulfite
- Hydrofluoric acid (Fluoridric acid)
- Oxidizing agents
(including peracetic acid)
- Air / gas treatment
- Biogas plants – H2S elimination systems (Desulfurators)
- Wet scrubber abatement systems (in-tank vertical pumps or external horizontal pumps)
- NOx and SOx elimination systems (urea)
- Detergents and sanitizers
- Loading and Unloading liquid tankers
- Bottling machines, filling machines and equipment
- Chemical transfers
- Cosmetics
- Energy
- Lead Acid Battery Production
- Recycling
- Stack systems for cell batteries – electrolytes
- Hydrogen production
- Steel & aluminum industry
- Extrusion plants (matrix cleaning with NaOH)
- Pickling
- Galvanic industry
- Galvanic plants manufacturers
- Cleaning of banknote molds
- Printing machines (cleaning)
- Electroplating /Galvanic process
- Oil and gas
- Methane / Gas odorization systems
- Sulfur cycle / fatty acid saponification
- Sampling systems
- PCB industry
- PCB manufacturers for samples in home appliances and automotive sector
- Manufacturers of tanks and dedicated plant engineering
- Food industry
- Clean-in-place (C.I.P.) systems for food industry
- Cheese salting
- Dairies
- Textile industries
- Dye-works, fabric coloring and fixing (sodium hydroxide and acetic acid)
- Industrial laundries (bleaching)
